Sharp PN-465E 11 E, Other terminals, Connecting external speakers, Connecting multiple monitors

Page 13

Other terminals

PC/AV audio output terminals

•Audio from the equipment connected to the AV audio input terminals or PC audio input terminal is output. Connect to the audio input terminals of the connected equipment using a commercially available audio cable (RCA).

•The audio output varies depending on the input mode selection. (See page 15.)

•The volume level can be adjusted using the volume adjustment. (See page 15.)

•Selecting FIXED of “AUDIO OUTPUT” from the OPTION menu fixes the volume of sound output from the audio output terminals. (See page 19.)

•Audio signals output from the PC/AV audio output terminals cannot be adjusted using the AUDIO menu.

PC/AV output terminals

Video signals from PC1 and AV1 can be output to HDCP-compatible external device. Use this terminal when you connect multiple monitors in a daisy chain via DVI cable (commercially available). (See the description on the right.) Images cannot be output to device that is not HDCP-compatible.

RS-232C input/output terminals

You can control the monitor from a PC by connecting a commercially available RS-232C straight cable between this terminal and the PC. (See page 25.)

Connecting external speakers

Be sure to use external speakers with an impedance of 6 ohms and a rated input of at least 7 W.

(1)

(2)

1.While pushing the tab, insert the tip of the cable.

2.Release the tab.

TIPS

•Be sure to connect the + and - terminals and the left and right speakers properly.

•Avoid short circuiting the + and - terminals.

Connecting Peripheral Equipment

Connecting multiple monitors

You can connect multiple monitors (up to 5 monitors) in a daisy chain by using the PC1/AV1 input terminals and PC/AV output terminals of this monitor.

Connection example

First monitor

 

Second monitor

 

 

 

PC/AV output

PC1/AV1 input terminals

terminal

 

Digital signal (DVI) cables (commercially available)

To PC digital RGB output terminal

shows the signal flow

TIPS

•The length of the signal cables or surrounding environment may affect the image quality.

•The screen may not display properly when using terminals other than PC1/AV1 for the input mode. In this case, turn off the power to all the monitors connected in a daisy chain and then turn the power on again.

ENGLISH

11 E

Page 12 Page 14
Image 13
Page 12 Page 14
Contents PN-465E Sharp Electronics Europe GmbH For Customers in U.K Refer Servicing to Qualified Service PersonnelGREEN-AND-YELLOW Earth Blue Neutral Brown Live Information on Disposal for Business Users Information on Disposal for Users private householdsEuropean Union Other Countries outside the EUDear Sharp Customer Safety Precautions fluorescent tubes in this product have a limited lifetime Tips and Safety InstructionsContents LCD panel Remote control sensor See Supplied AccessoriesPart Names Front viewSignal transmitter Remote control unitPower button See Mute button See Part Names Rear viewMounting precautions How to Install the MonitorFor the monitor in horizontal orientation For the monitor in vertical orientationConnection with AV equipment Connecting Peripheral EquipmentConnection with a PC AV1 input terminal AV2 input terminalsConnecting multiple monitors Connecting external speakersConnecting Peripheral Equipment 11 EInto the AC input terminal. into the AC power outlet Connecting the Power CordMounting the Temporary Stands Monitor is heavy. It must be handled by 2 or more peopleSetting the batteries Preparing the Remote Control UnitRemote control operation range Binding CablesTurning on the main power Turning Power On/OffTurning power on/off Disabling power on/off operations15 E Basic OperationMute MenuWide Zoom Normal Basic Operation Switching the screen sizeDotbyDot 17 E Menu ItemsDisplaying the menu screen Example of operationMenu Items Menu item details19 E PIP/PbyP Menu Items ENLARGE PC inputDual screen display Menu Items Enlarge 21 EHorizontal orientation Vertical orientationADVANCED items AV input See Automatic adjustment Adjustments for PC screen displayScreen display for adjustment Automatic adjustment is complete in several secondsOSD Display Adjustment LockLED RS-232CControlling the Monitor with a PC Communication procedure25 E PC connectionCommunication interval Controlling the Monitor with a PC Response code formatID numbers 27 E Commands for ID controlControlling the Monitor with a PC Volume settings for all monitors are returned Repeater control commandControlling the Monitor with a PC Repeater control Power control/Input mode selection RS-232C command tableHow to read the command table 29 EControlling the Monitor with a PC Picture menu Setup menuAudio menu 31 E Enlarge menu When the input mode is PCControlling the Monitor with a PC Option menu PIP/PbyP menuOthers Temperature Sensor Dsta33 E TroubleshootingProduct Specifications SpecificationsVesa DDC2B Vesa DPMS, DVI DmpmCompatible signal timing PC Dimensional Drawings35 E SpecificationsPC1/AV1 input terminal pins Specifications Power managementRS-232C input terminal pins RS-232C output terminal pins
Top Page Image Contents