Sharp PN-465E operation manual ADVANCED items AV input See

Page 24

Menu Items

SCHEDULE

You can set the time to switch the monitor on and off.

Set this function with “SCHEDULE” in the OPTION menu. (See page 19.)

SCHEDULE

 

PC2 ANALOG

XXXX/XX/XX XXX XX:XX:XX

 

No. (1) POWER (2)

DAY OF THE WEEK (3)

TIME(4) INPUT (5)

OK…[MENU]

1 0 2 4 x 7 6 8

V: 60 Hz H: 48.4 kHz

1.Press or to select the SCHEDULE number, and press .

2.Set the SCHEDULE. (See the description below.)

Press or to select the date and time, and press

or to change the setting.

3.Press MENU .

SCHEDULE becomes effective.

(1)

●: SCHEDULE effective

-: SCHEDULE not effective

(2) POWER

ON : Switches the monitor on at the specified time.

OFF : Switches the monitor off at the specified time and puts the monitor in standby mode.

(3) DAY OF THE WEEK

Specifies the day of the week to execute the SCHEDULE. ONLY ONCE:

Executes the SCHEDULE once on the specified day. Specify the day of the week to execute the SCHEDULE.

EVERY WEEK:

Executes the SCHEDULE on the specified day of the week every week. Specify the day of the week to execute the

SCHEDULE.

Periodic setting such as “Monday through Friday” is also possible.

EVERY DAY:

Executes the SCHEDULE every day regardless of the day of the week.

(4) TIME

Specifies the time to execute the SCHEDULE.

(5) INPUT

Specifies the input mode at power-on. When not specifying, the screen at the previous power-off appears.

Input modes displayed on “PC1/AV1” depend on DVI SELECT settings.

Input modes displayed on “PC3/AV2” depend on BNC SELECT settings.

Caution

•Do not switch off the main power after setting the

SCHEDULE.

•Specify the correct date and time. (See pages 14 and 19.) SCHEDULE does not function unless the date and time are specified.

•Check regularly that the set date and time are correct.

TIPS

•Up to 8 SCHEDULE items can be registered.

•Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode.

•A SCHEDULE that has a large number has precedence over that of a small number when schedules overlap.

ADVANCED items (AV input) (See page 18.)

FLESH TONE

Adjust the hue control.

3D-NR

Reduce the noise of playback images on video.

Setting a higher level reduces more noise. However, it may cause blurring on an image.

MPEG-NR

Reduce block noise caused by digital compression.

3D-Y/C (AV3)

Specify whether to perform 3-dimension Y/C separation.

If dot interference or cross-colour is occurring in fast-motion scenes, selecting “OFF” may improve the image quality.

E22

Page 23 Page 25
Image 24
Page 23 Page 25
Contents PN-465E Sharp Electronics Europe GmbH Refer Servicing to Qualified Service Personnel For Customers in U.KGREEN-AND-YELLOW Earth Blue Neutral Brown Live Information on Disposal for Users private households Information on Disposal for Business UsersEuropean Union Other Countries outside the EUDear Sharp Customer Safety Precautions Tips and Safety Instructions fluorescent tubes in this product have a limited lifetimeContents Supplied Accessories LCD panel Remote control sensor SeePart Names Front viewRemote control unit Signal transmitterPower button See Mute button See Part Names Rear viewHow to Install the Monitor Mounting precautionsFor the monitor in horizontal orientation For the monitor in vertical orientationConnecting Peripheral Equipment Connection with AV equipmentConnection with a PC AV1 input terminal AV2 input terminalsConnecting external speakers Connecting multiple monitorsConnecting Peripheral Equipment 11 EConnecting the Power Cord Into the AC input terminal. into the AC power outletMounting the Temporary Stands Monitor is heavy. It must be handled by 2 or more peoplePreparing the Remote Control Unit Setting the batteriesRemote control operation range Binding CablesTurning Power On/Off Turning on the main powerTurning power on/off Disabling power on/off operationsBasic Operation 15 EMute MenuBasic Operation Switching the screen size Wide Zoom NormalDotbyDot Menu Items 17 EDisplaying the menu screen Example of operationMenu item details Menu Items19 E Menu Items ENLARGE PC input PIP/PbyPDual screen display 21 E Menu Items EnlargeHorizontal orientation Vertical orientationADVANCED items AV input See Adjustments for PC screen display Automatic adjustmentScreen display for adjustment Automatic adjustment is complete in several secondsAdjustment Lock OSD DisplayLED RS-232CCommunication procedure Controlling the Monitor with a PC25 E PC connectionControlling the Monitor with a PC Response code format Communication intervalID numbers Commands for ID control 27 EControlling the Monitor with a PC Repeater control command Volume settings for all monitors are returnedControlling the Monitor with a PC Repeater control RS-232C command table Power control/Input mode selectionHow to read the command table 29 ESetup menu Controlling the Monitor with a PC Picture menuAudio menu Enlarge menu When the input mode is PC 31 EControlling the Monitor with a PC Option menu PIP/PbyP menuTemperature Sensor Dsta OthersTroubleshooting 33 ESpecifications Product SpecificationsVesa DDC2B Vesa DPMS, DVI DmpmDimensional Drawings Compatible signal timing PC35 E SpecificationsSpecifications Power management PC1/AV1 input terminal pinsRS-232C input terminal pins RS-232C output terminal pins
Top Page Image Contents