Sharp PN-465E operation manual Product Speciﬁcations, Vesa DDC2B, Vesa DPMS, DVI Dmpm, Pc/Av

Page 36

			Speciﬁcations
Product Speciﬁcations
Model		PN-465E
LCD element		46" wide (116.8 cm diagonal) ASV low-reflection black TFT LCD
Max. resolution	(pixels)	1920 x 1080
Max. colours		16.77 M colours (8 bits/colour)
Pixel pitch		0.53025 mm (H) x 0.53025 mm (V)
Viewing angle		176° right/left/up/down (contrast ratio ≥ 10)
Screen active area	(mm)	1018.1 x 572.7
Computer input signal		Digital (DVI 1.0 standard-compliant), Analogue RGB (0.7 Vp-p) [75 Ω]
Sync signal		Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
		Composite sync (TTL: positive/negative)
Video colour system		PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz)
Plug and play		VESA DDC2B
Power management		VESA DPMS, DVI DMPM
Input terminals		PC/AV	Digital		DVI-D 24 pin (HDCP compatible) x 1
		PC	Analogue		Mini D-sub 15 pin, 3 rows x 1, BNC 12 x 1
			Audio		3.5 mm mini stereo jack x 1
		AV	Composite video		BNC x 1
			Component		BNC (Y, Cb/Pb, Cr/Pr)*1 x 1
			Audio		RCA pin (L/R) x 1
		Serial (RS-232C)			D-sub 9 pin x 1
Output terminals		PC/AV	Digital		DVI-D 24 pin x 1 *3
		Audio			RCA pin (L/R) x 1
		Serial (RS-232C)			D-sub 9 pin x 1
		Speaker			7 W + 7 W [6 Ω]
Power requirement		AC 100 V - 240 V, 50/60 Hz
Operating temperature		0°C to 40°C
Operating humidity		20% to 80% (no condensation)
Power consumption		266 W (Input signal waiting mode: 7 W, Standby mode: 4 W)
Dimensions	(mm)	Approx. 1,113 x 140 x 657 (excluding protrusions)
Weight	(kg)	Approx. 35.5 (excluding the temporary stand)

*1 Cannot be used simultaneously.

*2 Does not support plug and play.

*3 Connection is allowed with an HDCP-compatible device only. Does not support Repeater control function.

As a part of our policy of continuous improvement, SHARP reserves the right to make design and speciﬁcation changes for product imporovement without prior notice. The performance speciﬁcation ﬁgures indicated are nominal values of production units. There may be some deviations from these values in individual units.

E34

Image 36

Contents PN-465E Sharp Electronics Europe GmbH Refer Servicing to Qualified Service Personnel For Customers in U.KGREEN-AND-YELLOW Earth Blue Neutral Brown Live Information on Disposal for Users private households Information on Disposal for Business UsersEuropean Union Other Countries outside the EUDear Sharp Customer Safety Precautions Tips and Safety Instructions ﬂuorescent tubes in this product have a limited lifetimeContents Supplied Accessories LCD panel Remote control sensor SeePart Names Front viewRemote control unit Signal transmitterPower button See Mute button See Part Names Rear viewHow to Install the Monitor Mounting precautionsFor the monitor in horizontal orientation For the monitor in vertical orientationConnecting Peripheral Equipment Connection with AV equipmentConnection with a PC AV1 input terminal AV2 input terminalsConnecting external speakers Connecting multiple monitorsConnecting Peripheral Equipment 11 EConnecting the Power Cord Into the AC input terminal. into the AC power outletMounting the Temporary Stands Monitor is heavy. It must be handled by 2 or more peoplePreparing the Remote Control Unit Setting the batteriesRemote control operation range Binding CablesTurning Power On/Off Turning on the main powerTurning power on/off Disabling power on/off operationsBasic Operation 15 EMute MenuBasic Operation Switching the screen size Wide Zoom NormalDotbyDot Menu Items 17 EDisplaying the menu screen Example of operationMenu item details Menu Items19 E Menu Items ENLARGE PC input PIP/PbyPDual screen display 21 E Menu Items EnlargeHorizontal orientation Vertical orientationADVANCED items AV input See Adjustments for PC screen display Automatic adjustmentScreen display for adjustment Automatic adjustment is complete in several secondsAdjustment Lock OSD DisplayLED RS-232CCommunication procedure Controlling the Monitor with a PC25 E PC connectionControlling the Monitor with a PC Response code format Communication intervalID numbers Commands for ID control 27 EControlling the Monitor with a PC Repeater control command Volume settings for all monitors are returnedControlling the Monitor with a PC Repeater control RS-232C command table Power control/Input mode selectionHow to read the command table 29 ESetup menu Controlling the Monitor with a PC Picture menuAudio menu Enlarge menu When the input mode is PC 31 EControlling the Monitor with a PC Option menu PIP/PbyP menuTemperature Sensor Dsta OthersTroubleshooting 33 ESpeciﬁcations Product SpeciﬁcationsVesa DDC2B Vesa DPMS, DVI DmpmDimensional Drawings Compatible signal timing PC35 E SpeciﬁcationsSpeciﬁcations Power management PC1/AV1 input terminal pinsRS-232C input terminal pins RS-232C output terminal pins