INSTALLATION INSTRUCTIONS
IMPORTANT INFORMATION
AOnly trained specialists should install the unit.
AObserve automotive industry quality standards.
AFire hazard! When drilling, care must be taken not to damage concealed wiring harnesses, the fuel tank and fuel lines.
ANever drill into supporting or
AOnly install in vehicles with 12V negative ground systems. Risk of malfunction, damage and vehicle fire can result if installed in unsuitable vehicles.
Connection in vehicles equipped with standard ISO connectors
The navigation radio may be installed without major preparation in vehicles equipped with ISO standard connectors. Some signals may have to be connected to ISO connector A (refer to “Connection overview ISO chamber A”).
For vehicles with different connection requirements, ask your dealer for special cables for a
Connection in vehicles without standard ISO connectors
If no adapter cables are available for your vehicle, connect the navigation radio as described in “Electrical connections”.
Taking safety precautions, Fig. 1
ABefore starting work, disconnect the earth cable from the negative terminal of the vehicle battery in order to prevent short circuits. For this purpose, follow the vehicle manufacturer’s safety instructions (alarm system, airbag, immobilizer, etc.).
Making the electrical connections
Route all wiring with care. For wiring, refer to the connection diagram on the cover pages and the following table
Do not cut
Depending on the manufacturer of the connecting and adapter cables, they may deviate from the ones shown here.
3