Display Display, IX-BASS Band, Audio Mute Mute

CD6111

Treble

Press PUSH (4) three times until “TRB” appears in the display. Within five seconds, rotate the volume control (3) clockwise or counter clockwise to adjust Treble from “-10” to “+10”. “00” represents a flat response. The treble level is shown on the display for five seconds or until another function is activated.

Balance

Press PUSH (4) four times until “BAL” appears in the display. Within five seconds, rotate the volume control (3) clockwise (or counter clockwise) to adjust Balance between the right and left speakers from “BAL 10R” (full right) to “BAL 10L” (full left). “BAL L=R” represents an equal balance level between the right and left speakers. The balance position is shown on the display for five seconds or until another function is activated.

Fader

Press PUSH (4) five times until “FAD” appears in the display. Within five seconds, rotate the volume control (3) clockwise or counter clockwise to adjust balance between the front and rear speakers from “FAD 10R” (full rear) to “FAD 10F” (full front). “FAD F=R” represents an equal balance level between the front and rear speakers. The fader position is shown on the display for five seconds or until another function is activated.

NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. In addition, the visibility of the numbers on the LCD may decrease slightly. The LCD display will return to normal when the temperature increases to a normal range.

Display (DISPLAY)

When the unit is off, the LCD displays the time of day. When the unit is on, the LCD automatically shows the tuner, CD or CD changer display, depending on which mode of operation is currently activated.

LA B

VOL

TREFAD

Display Clock

FAD

		FAD
		STRE
BA	LB	A
BA

BAL

TREF S

BAS

	RTEFAD
	S
LB	A
AB
	EL
	TC

TRB

During tuner, CD or CD changer operation, press DISPLAY (9) to display the time of day. After five seconds, the display reverts to tuner, CD or CD changer display.

Set Clock

1.	To set the clock, turn the radio on in tuner mode (or any other mode).
2.	Press DISPLAY. The time appears on the display.
3.	Press and hold DISPLAY until the time display begins flashing.
4.	While the display is flashing, press the Up Tuning button (14a) to adjust hours and the “A”
	(AM) or “P” (PM) indication. Press the Down Tuning button (14b) to adjust minutes.
5.	After five seconds, the time will set and the display will return to tuner, CD or CD changer

iX-BASS (BAND)

Press BAND (5) for two seconds to activate the iX-BASS feature. When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. When this feature is activated, “LOUD ON” will appear in the display for five seconds. Press BAND again for two seconds to deactivate this feature. “LOUD OFF” appears in the display for five seconds.

Audio Mute (MUTE)

Press (6) to mute the audio volume. “MUTE” flashes on the display. Restore volume to the previous setting by pressing the mute button again, adjusting the volume control, or by pressing any other button on the unit.

Liquid Crystal Display (LCD)

The liquid crystal display (LCD) panel (8) displays the frequency, time and activated functions of the unit, including a combination audio level/disc indicator, which appears as dual disc icons with circular bar graphs depicting the audio signal. In addition, the display contains a receive signal indicator that depicts the relative strength of the incoming broadcast frequency.

display.

HOURS

MINUTES

Front Panel Release

The front panel release button (10) releases the mechanism that holds the front panel to the chassis.