LG Electronics 23MB35PM, 22MB35PM, 19MB35PM Setting up the Monitor set, Attaching the Stand Base

ASSEMBLING AND PREPARING 5

Setting up the Monitor set

Attaching the Stand Base

1Place the Monitor set with the screen side down on a flat and cushioned surface.

CAUTION

y yTo protect the screen from scratches, cover the surface with a soft cloth.

2Check the position (at the front and rear) of the stand body, then mount the stand base on the stand body as shown in the figure.

Stand Body

Stand Base

3Using a coin, turn the screw clockwise to se- cure the stand base.

Stand Base

Detaching the stand base

1Place the monitor's screen face down.

To protect the screen from scratches, cover the surface with a soft cloth.

2Using a coin, turn the screw in the stand base counterclockwise. Detach the stand base from the stand body.

Stand Body

Stand Base

CAUTION

yyThe components appearing in the illustra- tions may look different from the actual prod- uct.

yyDo not carry the monitor upside-down as this may cause it to fall off its stand, resulting in damage or injury.

yyTo avoid damaging the screen when lifting or moving the monitor, only hold the stand or the plastic cover. This avoids putting unnec- essary pressure on the screen.

yyOnly remove the tape and the locking pin when the monitor is mounted on the stand base and is in an upright position. Otherwise, the stand body may protrude, which may lead to injury.

ENGLISH