ASSEMBLING AND PREPARING 7
Mounting on a table
1Lift the monitor and place it on the table in an upright position.
Install at least 10 cm away from the wall to ensure sufficient ventilation.
10 cm
10 cm
10 cm
10 cm
Adjusting the angle
1Place the monitor mounted on the stand base in an upright position.
2Adjust the angle of the screen. The angle of the screen can be adjusted up to 5° forwards and 20° backwards for a comfortable viewing experience.
ENGLISH
Rear Side | Front Side |
2Connect the Power cord to the monitor, then plug the power cord into the wall outlet.
3Press the 
(Power) button on the front of the monitor to turn on the monitor.
CAUTION
y yUnplug the power cord prior to moving or installing the monitor. There is risk of electric shock.
WARNING
y yTo avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor's frame as illustrated below.
y yBe careful not to touch or press the screen area when adjusting the angle of the monitor.