Using the Monitor SET, Connecting to a PC

USING THE MONITOR SET 11

USING THE MONITOR SET

Connecting to a PC

y yYour Monitor set supports Plug & Play*.

*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.

D-SUB connection

Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.

NOTE

y yWhen using a D-Sub signal input cable connector for Macintosh

y yMac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.

DVI-D connection

Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.

NOTE

y yWhen you want to use two PC in our Monitor, please connect the signal cable(D-SUB/ DVI-D) respectively in Monitor set.

y yIf you turn the Monitor set on while it is cold, the screen may flicker. This is normal.

y ySome red, green, or blue spots may appear on the screen. This is normal.

CAUTION

y yConnect the signal input cable and tighten

it by turning the screws clockwise.

y yDo not press the screen

with your finger for a long time as this may result in temporary distortion on the screen.

y yAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.

ENGLISH