LG Electronics 22MB35PM, 23MB35PM, 19MB35PM owner manual

Page 25

ENGLISH

24SPECIFICATIONS

SPECIFICATIONS

22MB35PM

Display

Screen Type

TFT (Thin Film Transistor) LCD (Liquid Crystal Display)

 

 

Panel,Anti-Glare coating

 

 

54.6 cm visible diagonal (21.5 inch)

 

Pixel Pitch

0.248 mm x 0.248 mm (Pixel Pitch)

Sync Input

Horizontal Frequency

30 kHz to 83 kHz (Automatic)

 

Vertical Frequency

56Hz to 75Hz (D-SUB,DVI-D)

 

Input Form

Separate Sync. Digital

Video Input

Signal Input

15 pin D-SUB Connector /DVI-D Connector (Digital)

 

Input Form

RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Resolution

Max

D-SUB(Analog) : 1920 x 1080 @ 60 Hz

 

 

DVI (Digital) : 1920 x 1080 @ 60 Hz

 

Recommend

VESA 1920 x 1080 @ 60 Hz

Plug & Play

DDC 2B(Analog,Digital)

 

Power

On Mode : 20 W (ENERGY STAR® standard)*

Consumption

Sleep Mode ≤ 0.3 W

 

 

Off Mode ≤ 0.3 W

 

Power Input

AC 100-240V ~ 50/60Hz 1.0 A

Speaker Wattage

1 W +1 W

 

Dimensions

With Stand

50.9 cm x 35.3 cm x 22.4 cm

(Width x Height x

 

 

Without Stand

50.9 cm x 30.4 cm x 14.4 cm

Depth)

 

 

Weight

3.9 kg

 

Tilt Range

-5° to 20°

 

Environmental

Operating Temperature

10°C to 35 °C

conditions

Operating Humidity

10 % to 80 %

 

 

 

 

Storage Temperature

-20°C to 60 °C

 

Storage Humidity

5 % to 90 % non-Condensing

 

 

 

Stand Base

Attached ( ), Detached (O)

Power cord

Wall-outlet type

 

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

*The power consumption level can be different by operating condition and monitor setting.

*The On mode power consumption is measured with ENERGY STAR® test standard.

*ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.

Image 25
Contents IPS LED Monitor LED LCD Monitor Page Contents Assembling and Preparing Power Cord Stand Base Audio CableUnpacking SUB Cable DVI-D CableParts and buttons Power IndicatorAttaching the Stand Base Setting up the Monitor setDetaching the stand base Stand Body Stand BaseDetaching the stand body Mounting on a table Adjusting the angleRear Side Front Side Using the Kensington locking device Adjusting the stand heightStand Body Tape Locking Pin Swivel stand Using the Pivot functionHead section Stand section Model Mounting on a wallVesa a x B 75 x 100 x Standard screw Number of screws Connecting to a PC Using the Monitor SETSUB connection DVI-D connectionPeripheral device connection YSelf Image Setting Function‘AUTO’ Function Power Indicator Customizing SettingsMonitor set Buttons ButtonMenu Settings Customizing SettingsMenu Analog Digital EnvironmentPicture Menu Next Menu Color Description Gamma Color ResetColor Temp Custom Six ColorNoise and clear or sharpen the image of characters Display~ 24 hours OthersReader Mode Description Reader SettingReader Reader OffDisplay the Super Energy Saving OSD Off Disables Super Energy SavingHigh LowCheck Control Panel Display Settings and adjust the display TroubleshootingNo image appears Do you see a OSD Locked message on the screen?Recommend resolution Settings19MB35PM Specifications22MB35PM 23MB35PM Indicator Preset Modes ResolutionMode LED Color Horizontal Vertical PolarityH/V FrequencykHz FrequencyHzProper Posture Proper posture for using the Monitor setDeclaration of Conformity