Tweeter Installation

First, run speaker wires from the tweeter output of the crossover (see diagrams on page 5) to the desired tweeter mounting locations, observing the same precautions as mentioned in the woofer installation section. Terminate the wires with the supplied 2.8 mm and 4.7 mm male crimpable connectors.

TWEETER FiXTURE INSTALLATION The dome tweeters supplied with your

C2-600 system have been designed for maximum mounting versatility. There are two primary methods by which the tweeters can be mounted in your vehicle:

Flush-Mount:For tweeter integration in a clean, unobtrusive manner, you will use the supplied flush-mount cups. This compact mounting fixture is installed using the method illustrated in Diagram E and requires a mounting hole with a diameter of 1.625 in. (41.28 mm).

At least 0.76 in. (19.3 mm) of clearance is required behind the mounting surface of the tweeter for the spring clips and 1.18-inch machine screws used in mounting the fixture. It may be necessary in some limited depth applications to cut down the length of the machine screw, or to use a shorter screw (not supplied). Hand-tighten the machine screw until the fixture is secure. Run the tweeter’s wires through the hole, make appropriate connections and insert the tweeter into the mounting cup. Push the tweeter down and rotate it clockwise to lock it into place.

Surface-Mount:In this application, you will not need to cut large holes in your vehicle’s panels for the tweeters. You will only need to drill a hole for the wires and two smaller holes for the mounting screws. This application is useful when mounting the tweeters to a panel that has insufficient clearance behind it for the tweeter’s magnet structure.

Using the fixture as a template, mark the screw hole locations and a location in the center of the fixture for the wire hole. Remove the fixture and drill pilot holes for the screws and a 1/8-inch (3 mm) for the wires. Use the supplied #6 x 1-inch sheet metal screws to secure the fixture as shown in Diagram F (hand-tighten). Run the tweeter’s wires through the hole, make appropriate connections and insert the tweeter into the mounting cup. Push the tweeter down and rotate it clockwise to lock it into place.

10 JL Audio - C2-600 Owner’s Manual

C2-600, C2-600-02102009, C2-600cw, C2-600-XO specifications

JL Audio is renowned for their high-performance audio equipment, and the C2 series of speakers is a testament to their commitment to quality sound. The C2-600cw, C2-600-XO, and C2-600-02102009 models are particularly noteworthy, showcasing a combination of advanced technologies and impressive specifications.

The C2-600cw is a 6.5-inch component subwoofer designed for those who seek rich, deep bass response. Its Polypropylene cone is both lightweight and rigid, ensuring optimal audio output without sacrificing clarity. The rubber surround provides added durability while also helping the subwoofer produce powerful low frequencies. Its voice coil design allows for efficient heat dissipation, enhancing performance during extended use.

The C2-600-XO is a passive crossover designed to complement the C2 series speakers. This essential component ensures that sound frequencies are directed to the appropriate drivers, thereby enhancing the overall soundstage. Constructed with high-quality materials, the C2-600-XO minimizes distortion and maximizes the efficiency of the audio system. Its design incorporates low-pass and high-pass filters to achieve a smooth transition between frequencies, making it an invaluable addition for enthusiasts aiming for precise audio reproduction.

The C2-600-02102009 model is an innovative edition within the C2 series, showcasing JL Audio’s commitment to continuous improvement and technology integration. This model features enhanced sensitivity, allowing it to produce robust sound even with lower-power amplifiers. Additionally, it employs a high-temperature voice coil and advanced cooling systems to ensure performance consistency under demanding conditions.

Across the C2 series, you'll find features such as impressive power handling and frequency response ranges. The line is engineered with a focus on sound accuracy, which allows listeners to experience the intricate nuances of their favorite music. Furthermore, installation versatility makes these models suitable for a variety of vehicles and audio setups.

In summary, the JL Audio C2 series—including the C2-600cw, C2-600-XO, and C2-600-02102009—exemplifies cutting-edge audio technology and design. Each model contributes to a dynamic, enriched listening experience, making them an excellent choice for car audio enthusiasts and audiophiles alike. The combination of robust construction and advanced acoustics ensures that these speakers not only sound exceptional but also stand the test of time in performance and reliability.