Enhancing your system, Sleep operation, Headphones

Timer and sleep operation (Remote control only) (continued)

QSleep operation

The radio, compact disc, iPod and USB can all be turned off automatically.

1Play back the desired sound source.

2Press the SLEEP button.

3Within 10 seconds, press the SLEEP button repeatedly to select the time.

4“SLEEP” will appear.

5The unit will enter the power stand-by mode automatically after the preset time has elapsed. The volume will be turned down 1 minute before the sleep operation ﬁnishes.

To conﬁrm the remaining sleep time:

1While “SLEEP” is indicated, press the SLEEP button.

To cancel the sleep operation:

Press the ON/STAND-BY button while “SLEEP” is indicated. To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows.

1While “SLEEP” is indicated, press the SLEEP button.

2Within 10 seconds, press the SLEEP button repeatedly to select “SLEEP 00”.

QTo use timer and sleep operation together

Sleep and timer playback:

For example, you can fall asleep listening to the radio and wake up to CD in the next morning.

1Set the sleep time (see above, steps 1 - 5).

2While the sleep timer is set, set the timer playback (steps 2 - 9, page 12).


Sleep timer setting Timer playback setting				End time

	90 minutes		Desired time

	Sleep operation will	Timer playback start
	automatically stop	time

Enhancing your system

The connection cord is not included. Purchase a commercially available cord as shown below.

Portable audio player, etc.

Audio cable

(not supplied)

MICRO COMPONENT SYSTEM

QListening to the playback sounds of portable audio player, etc.

1Use a connection cord to connect the portable audio player etc. to the AUDIO IN jack. When using video equipment, connect the audio output to this unit and the video output to a television.

2Press the ON/STAND-BY button to turn the power on.

3Press the AUDIO IN button on the remote control or FUNCTION button repeatedly on main unit to select AUDIO IN function.

4Play the connected equipment. If volume level of the connected device is too high, sound distortion may occur. Should this happen, lower the volume of the connected device. If volume level is too low, increase the volume of the connected device.

Note:

To prevent noise interference, place the unit away from the television.

QHeadphones

ODo not turn the volume on to full at switch on and listen to music at moderate levels. Excessive sound pressure from earphones and headphones can cause hearing loss.

OBefore plugging in or unplugging the headphone, reduce the volume.

OBe sure your headphone has a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms. The recommended impedance is 32 ohms.

OPlugging in the headphone disconnects the speakers automatically. Adjust the volume using the VOLUME control.

E-13

XLDH259P specifications

The Sharp XLDH259P is a versatile and powerful projector designed to meet the needs of both business professionals and educators. With its compact form factor and high-performance features, it stands out as a reliable choice for presentations, lectures, and other visual displays.

One of its key features is the advanced 4,000 ANSI lumens brightness, which ensures clear and vivid images even in well-lit environments. This makes the XLDH259P ideal for conferences and classrooms where ambient light can be a challenge. Coupled with a high contrast ratio, this projector delivers sharp and detailed images, enhancing the viewing experience for audiences.

Another notable characteristic of the Sharp XLDH259P is its support for Full HD 1080p resolution. This capability is crucial for presentations that require a higher level of detail, such as graphics-heavy slides, videos, and intricate visuals. The projector also supports a variety of resolutions, allowing users to adapt to different content types seamlessly.

The XLDH259P incorporates advanced image processing technologies designed to enhance picture quality further. With features such as image shift, digital keystone correction, and lens zoom, users can easily adjust the projection settings to fit any screen size and distance, ensuring a perfect fit for any environment. This flexibility is particularly important in dynamic settings such as classrooms or multi-purpose conference rooms.

Port connectivity is another strong suit of the Sharp XLDH259P. It is equipped with multiple input options, including HDMI, VGA, and USB, allowing for easy connections to laptops, media players, and other devices. The inclusion of built-in speakers also eliminates the need for separate audio equipment in smaller settings.

Efficiency is yet another hallmark of the XLDH259P. It features a low power consumption mode, which not only reduces operating costs but also extends the life of the lamp. The projector is designed for ease of maintenance, with accessible filters and a long lamp life, ensuring low total cost of ownership.

In summary, the Sharp XLDH259P is a feature-rich projector that excels in brightness, resolution, and connectivity, making it an ideal choice for both professional presentations and educational purposes. Its user-friendly design and advanced technologies offer versatility and performance, ensuring that it meets the demands of any user looking for a reliable projection solution.