Remote control (continued)
Notes concerning use:
OReplace the batteries if the operating distance is reduced or if the operation becomes erratic.
OPeriodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth.
OExposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit.
OKeep the remote control away from moisture, heat, shock, and vibrations.
General control
QTo turn the power on
The first time the unit is plugged in, the unit will enter the demonstration mode.
Function Main unit | Remote | Operation | |
control | |||
|
|
QAuto power on function
When you press any of the following buttons, the unit turns on.
OiPod® / iPhone, CD, USB, AUDIO IN, TUNER (BAND) on the remote control: Selected function is activated.
O button on the main unit: The unit turns on and playback of the last function will start (CD, TUNER, USB, iPod, AUDIO IN).
QAuto power off function
The main unit will enter the
AUDIO IN: No detection of input signal or very low sound audibility.
TUNER: No reception of broadcast signal.
CD / USB: In the stop mode.
Note:
However, if iPod/iPhone is docked, the unit will begin charging. “CHARGE MODE” will be displayed.
QMuting
The volume is muted temporarily when pressing the MUTE button on the remote control. Press again to restore the volume.
QX-Bass control
When the power is first turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and
QBass control
1Press the BASS/TREBLE button to select “BASS”.
2Within 5 seconds, press the VOLUME (+ or
QTreble control
1Press the BASS/TREBLE button to select “TREBLE”.
2Within 5 seconds, press the VOLUME (+ or
Power | on/ | Press to turn the |
off |
| power on or to |
|
| go to |
|
| mode. |
Demo | on/ | ____ |
Press to enter to | ||
off |
| demonstration on |
|
| or off mode. |
QDisplay brightness control
QEqualizer
When the EQUALIZER MODE button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER MODE button repeatedly until the desired sound mode appears.
| FLAT | Equalizer off. |
| ||
| GAME | For game. |
CLASSIC | For classical music. | |
| POPS | For pop music. |
| VOCAL | Vocals are enhanced |
| JAZZ | For jazz. |
|
To dim the display brightness, press the DEMO/DIMMER button on the remote control.
QVolume auto fade-in
If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16 and fades in to the last set level.
QVolume control
Turn the volume knob toward VOL +/- (on main unit) or press VOLUME +/- (on remote control) to increase or decrease the volume.
QFunction
When the FUNCTION button on main unit is pressed, the current function will change to different mode. Press the FUNCTION button repeatedly to select desired function.
CD FM STEREO FM MONO AM
AUDIO IN iPod USB
Note:
The backup function will protect the memorized function mode for a few hours should there be a power failure or the AC power cord becomes disconnected.