Hotpoint HAE 51 G S, P S, HAE 51 X S, HAE 51 K S, 52 TCW S, 52TCK installation instructions Do Not

Models: 52TCK 52 TCW S HAE 51 HAE 51 K S HAE 51 G S HAE 51 X S P S

1 20
Download 20 pages 17.05 Kb
Page 9
Image 9
Do Not

PANS SHOULD

Not be concave (bowed in)

Not be convex (bowed out)

Not be rimmed

THE BEST COMBINATIONS This table is a general guide to the types of pan suitable for different types of hobs and cookers. Remember pans should be good quality, with smooth, flat bases. For any further information refer to manufacturers’ instructions.

Do Not

GB

Do not cook directly on the hob surface without a cooking utensil, as this will result in damage to the surface of the hob.

Do not use the hob as a worktop surface as damage may occur to the smooth surface of the hob.

Do not drag or slide utensils on the hob surface, as this will cause scratches in the surface of the hob.

Not be deeply ridged

But essentially Flat

3suitable 7unsuitable

*care should be taken when using any pans on these surfaces not to drag and cause scratching.

Do not allow a cooking utensil to come into contact with the hob surround.

Do not place anything between the base of the utensil and the ceramic hob, e.g. do not use asbestos mats, aluminium or wok stand.

Always

Never

 

 

Use good quality flat-based

Use gauze, metal pan

cookware on all electric heat

diffusers, asbestos mats and

sources.

stands e.g. Wok stands - they

 

can cause overheating.

Always ensure pans have

Use utensils with skirts or

clean, dry bases before

rims e.g. buckets and some

use.

kettles.

Ensure pans match size of

Use badly dented or distorted

heating area.

pans.

Remember good quality pans

Leave an element switched

retain heat well, so generally

on when not cooking.

only a low or medium heat is

 

necessary.

 

Ensure pan handles are

Cook food directly on the

positioned safely and away

ceramic glass.

from heat sources.

 

Always lift pans, do not drag.

Drag or slide utensils, along

 

the hob surface.

Always use pan lids except

 

when frying.

 

Deal with spillages

 

immediately but with care.

 

Ceramic*

Aluminium

Stainless steel with single layer copper base

Stainless steel with sandwich bases of aluminium and stainless or aluminium and copper

Enamelled steel

Enamelled aluminium

 

 

 

Enamelled based cast iron

With Extra Care

Copper

 

 

 

Toughened glass or ceramic / glass /

Not Recommended

pottery

 

Mild steel, Ferro-magnetic or stainless with a magnetic sandwich base

Do not leave any utensils, food or combustible items on the hob when it is not in use.

Do not place aluminium or plastic foil, or plastic containers on the hob.

Do not leave the hotplates or cooking areas switched On unless they are being used. We recommend not to place large preserving pans or fish kettles across two heating areas.

Do not leave utensils partly covering the heated areas. Always ensure that they are placed centrally over the heated areas and have the same diameter as the heating area used.

We recommend not to use a utensil with a base diameter greater than 25cm (l0ins).

Pressure cookers or other large pans should be used on the front cooking areas.

Always ensure that saucepan handles are positioned safely.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

9

 

Page 9
Image 9
Hotpoint HAE 51 G S, P S, HAE 51 X S, HAE 51 K S, 52 TCW S, 52TCK installation instructions Do Not