Hotpoint HAE 51 K S, P S, HAE 51 X S, HAE 51 G S, 52 TCW S, 52TCK Choosing Your Utensils, Do not

Models: 52TCK 52 TCW S HAE 51 HAE 51 K S HAE 51 G S HAE 51 X S P S

1 20
Download 20 pages 17.05 Kb
Page 10
Image 10
Choosing Your Utensils

GB

Choosing Your Utensils

 

 

 

Do not

use utensils with rough bases.

 

 

Do not

use lightweight utensils with thin,

 

 

distorted or uneven bases.

 

Do not

use lightweight enamelled steel

 

 

utensils.

 

Do not

use cast iron utensils.

 

Do not

use utensils with recessed, scrolled or

 

 

ridged bases.

 

Do not

use a utensil which has a base

 

 

concavity greater than l mm as this will

 

 

reduce the performance of the hob

 

Do not

use a utensil with a convex base.

 

Do not

use glass ceramic utensils.

 

Do not

use use lightweight saucepans with

 

 

plain thin copper bases on ceramic or

 

 

halogen hot plates.

Note: All copper pans are excellent conductors of heat, and are hard wearing and strong, but need quite a lot of care. They can be very heavy and do not usually have completely flat bases. The interiors are usually lined with a different material such as tin.

A stainless steel pan with a sandwich base of aluminium and stainless steel is an excellent conductor of heat and is suitable for use on ceramic and halogen hobs, providing they are used in accordance with the saucepans manufacturers’ recommendations.

Stainless steel pans with a sandwich base of aluminium and copper are excellent conductors of heat. If using stainless steel saucepans with aluminium and copper sandwich bases on ceramic and halogen hobs, the use of these pans must be in accordance with the saucepan manufacturers’ recommendations.

Extra care should be taken to ensure the base of the pan and the hob is cleaned, and the hob conditioned, after each and every use, when using this type of saucepan.

If these recommendations are not followed, the result will be a build up of small copper deposits on the surface of your hob which, if not cleaned after each use, will result in permanent marking of your hob.

Always lift the pan from the hob, do not drag or slide across the hob surface as damage may occur.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

10

Page 10
Image 10
Hotpoint HAE 51 K S, P S, HAE 51 X S, HAE 51 G S, 52 TCW S, 52TCK installation instructions Choosing Your Utensils, Do not