Sharp XLDH259P operation manual Troubleshooting chart

Page 15

Troubleshooting chart

Many potential problems can be resolved by the owner without calling a service technician.

If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center.

QGeneral

Symptom

Possible cause

O The clock is not set to

O Did a power failure occur? Reset the

the correct time.

clock. (Refer page 11)

O When a button is

O Set the unit to the power stand-by

pressed, the unit does

mode and then turn it back on.

not respond.

O If the unit still malfunctions, reset it.

 

(Refer page 14)

 

 

O No sound is heard.

O Is the volume level set to “MIN”?

 

O Are the headphones connected?

 

O Are the speaker wires disconnected?

QCD player

 

Symptom

Possible cause

 

 

O Playback does not start.

O Is the disc loaded upside down?

O

Playback stops in

O Does the disc satisfy the standards?

 

the middle or is not

O Is the disc distorted or scratched?

 

performed properly.

 

O

Playback sounds are

O Is the unit located near excessive

 

skipped, or stopped in

vibrations?

 

the middle of a track.

O Is the disc very dirty?

 

 

O Has condensation formed inside

 

 

the unit?

QRemote control

Symptom

Possible cause

O The remote control

O Is the AC power cord of the unit

does not operate.

plugged in?

 

O Is the battery polarity correct?

 

O Are the batteries dead?

 

O Is the distance or angle incorrect?

 

O Does the remote control sensor

 

receive strong light?

 

 

Q Tuner

Symptom

Possible cause

O The radio makes

O Is the unit placed near the TV or

unusual noises

computer?

continuously.

O Is the FM antenna or AM loop antenna

 

placed properly? Move the antenna

 

away from the AC power cord if it is

 

located nearby.

QUSB

 

Symptom

Possible cause

 

 

 

O

Device cannot be

O Is there any MP3/WMA file available?

 

detected.

O Is the device properly connected?

 

 

O Is it an MTP device?

 

 

O Does the device contain AAC file only?

 

 

O Playback does not start.

O Is it a copyright protected WMA file?

 

 

O Is it a false MP3 file?

 

 

 

O

Wrong time display.

O Is Variable Bitrate file being played

O

Wrong file name

back?

 

display.

O Is the File Name written in Chinese or

 

 

Japanese characters?

 

 

 

QiPod and iPhone

Symptom

Possible cause

 

 

O No sound is produced.

O The iPod or iPhone is not playing.

No image appears on

O The iPod or iPhone is not properly

the TV/monitor.

connected to the unit.

 

O Is the AC power cord of the unit

 

plugged in?

 

O The video cable is not properly

 

connected.

 

O The TV/monitor’s input selection is not

 

properly set.

 

O The iPod TV out feature has not been

 

set to output video.

O iPod or iPhone will not

O The iPod or iPhone is not making full

charge.

contact with the connector.

 

O Using iPod (3rd generation).

 

O The iPod or iPhone is not supported.

 

Refer to page 6 for compatible models.

O “This accessory is not

O The iPhone battery is low. Please

made to work with

charge the iPhone.

iPhone” or similar,

O iPhone is not properly docked.

appears on iPhone

 

screen.

 

 

 

QCondensation

Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit.

QIf problem occurs during operation

When this product is subject to strong outdoor interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

1Set the unit to the stand-by mode and turn the power on again.

2If the unit is not restored in the previous operation, unplug and plug in the unit again, and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory by resetting it.

QFactory reset, clearing all memory

1Press the POWER ON/STAND-BY button to enter the power stand-by mode.

2While pressing down the OPEN/CLOSE button, press the POWER ON/ STAND-BY button until “ALL CLEAR” appears.

Caution:

This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD program.

QBefore transporting the unit

Remove the iPod/iPhone, USB memory device and disc from the unit. Then, set the unit to the power stand-by mode. Carrying the unit with iPod/iPhone or USB memory device left docked or discs left inside might damage the unit.

E-14

Image 15
Contents FM antenna x AccessoriesSpecial Note IPhone adaptor xSpecial Notes Explanation of Graphical SymbolsAdditional Safety Information Important Safety InstructionsPrecautions For U.S. customer onlySystem connections System connections Remote controlVolume control Battery installationGeneral control Remote controlListening to the iPod or iPhone Listening to the iPod or iPhone Listening to a CD or MP3/WMA discAdvanced CD or MP3/WMA disc playback Listening to a CD or MP3/WMA discProgramed play MP3/WMA Procedure to playback MP3/WMA disc with folder mode onTo cancel the programed play mode Listening to USB mass storage device/MP3 playerListening to USB mass storage device/ MP3 player To play back USB/MP3 player with folder mode offTo play back USB/MP3 player with folder mode on Advanced USB playbackListening to the radio Setting the clock Remote control onlyTimer and sleep operation Remote control only Setting the clockTimer playback Enhancing your system Timer and sleep operation Remote control onlyTo use timer and sleep operation together HeadphonesTroubleshooting chart Maintenance Troubleshooting chartSpecifications

XLDH259P specifications

The Sharp XLDH259P is a versatile and powerful projector designed to meet the needs of both business professionals and educators. With its compact form factor and high-performance features, it stands out as a reliable choice for presentations, lectures, and other visual displays.

One of its key features is the advanced 4,000 ANSI lumens brightness, which ensures clear and vivid images even in well-lit environments. This makes the XLDH259P ideal for conferences and classrooms where ambient light can be a challenge. Coupled with a high contrast ratio, this projector delivers sharp and detailed images, enhancing the viewing experience for audiences.

Another notable characteristic of the Sharp XLDH259P is its support for Full HD 1080p resolution. This capability is crucial for presentations that require a higher level of detail, such as graphics-heavy slides, videos, and intricate visuals. The projector also supports a variety of resolutions, allowing users to adapt to different content types seamlessly.

The XLDH259P incorporates advanced image processing technologies designed to enhance picture quality further. With features such as image shift, digital keystone correction, and lens zoom, users can easily adjust the projection settings to fit any screen size and distance, ensuring a perfect fit for any environment. This flexibility is particularly important in dynamic settings such as classrooms or multi-purpose conference rooms.

Port connectivity is another strong suit of the Sharp XLDH259P. It is equipped with multiple input options, including HDMI, VGA, and USB, allowing for easy connections to laptops, media players, and other devices. The inclusion of built-in speakers also eliminates the need for separate audio equipment in smaller settings.

Efficiency is yet another hallmark of the XLDH259P. It features a low power consumption mode, which not only reduces operating costs but also extends the life of the lamp. The projector is designed for ease of maintenance, with accessible filters and a long lamp life, ensuring low total cost of ownership.

In summary, the Sharp XLDH259P is a feature-rich projector that excels in brightness, resolution, and connectivity, making it an ideal choice for both professional presentations and educational purposes. Its user-friendly design and advanced technologies offer versatility and performance, ensuring that it meets the demands of any user looking for a reliable projection solution.