Listening to the iPod or iPhone
iPhone and iPod operations Made for:
OiPhone 3GS
OiPhone 3G
OiPhone
OiPod touch (3rd generation)
OiPod touch (2nd generation)
OiPod touch (1st generation)
OiPod classic
OiPod with video
OiPod nano (5th generation)
OiPod nano (4th generation)
OiPod nano (3rd generation)
OiPod nano (2nd generation)
OiPod nano (1st generation)
OiPod with color display
OiPod mini
Caution:
Please update your iPod unit to the latest software version from Apple’s homepage before using it.
Notes:
OOnce the iPod or iPhone is connected to the unit it will begin charging.
OThe message “This accessory is not made to work with iPhone” or similar, may appear on the iPhone screen when:
-battery is low.
-the iPhone is not properly docked (eg. slanting). If this occurs, remove and
OThis product is made for iPhone. To prevent random interference when iPhone is docked, the headphone output is disabled, and “HP INVALID” will be displayed. You may also experience brief audio interference during incoming calls.
QiPod and iPhone adaptor connection
Notes:
OPlease use the adaptor supplied with your iPod or iPhone unit.
OYou can use an audio cable to connect your iPod to the AUDIO IN jack if:
1.your iPod adaptor does not fit into the iPod dock on the main unit.
2.you have an iPod that does not have an iPod adaptor.
3.you have an iPod that does not have an iPod 30 pin connector.
iPhone | iPhone | Capacity | |
Adaptor No. | Description | ||
| |||
|
|
| |
12 | iPhone | 4GB & 8GB & 16GB | |
|
|
| |
15 | iPhone 3G | 8GB & 16GB | |
|
|
| |
15 | iPhone 3GS | 16GB & 32GB | |
|
|
|
QTo insert iPod or iPhone adaptor 1 Open the iPod cover by pulling up the tip.
2Insert the iPod or iPhone adaptor into unit and connect your iPod or iPhone.
iPhone (bottom) | iPhone |
Dock connector
iPhone adaptor
iPhone dock
iPhone connector
Caution:
Unplug all accessories from the iPod or iPhone before inserting it into the dock.
QTo remove iPod or iPhone adaptor
Insert the tip of a screwdriver
QiPod or iPhone playback
1Press the
2Press the iPod/iPhone button on the remote control or FUNCTION button repeatedly on the main unit to select iPod function.
3Insert iPod or iPhone unit in iPod dock of main unit. “DOCK OK” will be displayed for 3 seconds.
4Press the (iPod/iPhone ) button to start playback.
QiPhone playback
OSound will only switch from iPhone to the main unit after authentication process is completed in approximately 10 seconds.
OIncoming calls will pause the playback and iPhone ringtones will be heard from the main unit speakers only.
OOnce the calls are answered, the conversation can only be heard through the
QTo disconnect iPod or iPhone
Simply remove the iPod or iPhone from the iPod dock. It is safe to do so even during playback.