| Specifications |
Additional Controls via LSR4300 | DIM |
Control Center Software: | LOAD Confi guration, SAVE Confi guration; Level TRIM +3 |
Display/ | dB to – 10 db in ¼ dB increments |
| |
Front Panel Display: | 31 LED Segments for dBFS and indication of settings |
Front Panel Meter: | |
Rear Panel Indicators: | 5 LED indicate Speaker ID Selection |
Physical |
|
Finish: | Dark graphite |
Handles: | 2 each, fl ush mounted on sides |
Mounting: | 4 threaded mounting points conforming to industry |
| standard square pattern, 107.9 mm x 50.8 mm (4 ¼” x 2” |
| in) center to center. M6 metric threads |
Low Frequency Vent: | Rear ported linear dynamics aperture |
Baffl e Construction: | |
Enclosure Construction: | 19 mm (3/4 in) MDF |
Net Weight: | 15 kg (32.5 lbs) (LSR4328P) |
| 13 kg (28.5 lbs) (LSR4326P) |
Dimensions (WxHxD): | 267 mm x 438 mm x 269 mm |
| (10.5” x 17.25”D x 10.6”) (LSR4328P) |
| 236 mm x 387 mm x 262 mm |
| (9.3” x 15.25” x 10.3”) (LSR4326P) |
Caution: Unsafe mounting or overhead suspension of any heavy load can result in serious injury and equipment damage. Mounting of speakers should be done by qualified persons in accordance with all applicable local safety and construction standards. Be certain to follow the instructions provided by the manufacturer of the mounting bracket. Before selecting a mount- ing bracket, be certain that it is capable of supporting the weight of the speaker to be mounted.
Notes:
All measurements unless otherwise stated made anechoically in a 4p environment at 2 meters, referenced to 1 meter by inverse square law.
The reference measurement microphone position is located perpendicular to the centerline of the low and high frequency transducers at the point 63.5 mm (2.5 in) below the center of the high frequency diaphragm.
Acoustic loading provided by the listening room increases maximum SPL capability and low frequency bass extension as compared to stated anechoic values.
Distortion measurements performed with the input voltage necessary to produce the stated A- weighted SPL at the stated measurement distance. Distortion figures refer to the maximum distortion measured in any 1/10th octave wide band in the stated frequency range.
JBL continually engages in research related to performance improvements. New materials, pro- duction methods, and design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design specification unless otherwise stated.
43