Kramer Electronics Cobra R1300A user manual Setup and Installation, Data Mode Configuration

Page 6

Setup and Installation

4 Setup and Installation

4.1 Data Mode Configuration

The serial signal is 3 wire TX, RX, GND and does not support full modem signals. Baud rates for the S2 series are fixed at 9600. Simplex modes are supported without jumper or other changes by simply using the TX signal only. S2 units require no configuration.

4.2 Making the Connections

This section contains figures showing connections with the specific Cobra R1300A / R1300S2 series models. In general, however, the connection and setup procedure at both transmitter and receiver ends is as follows:

NOTE: all units must be the same type for all supported features to function correctly. For example, a Cobra transmitter set for R/L summed audio must be connected to an R1300A / R1300S2 set for R/L summed audio. Similarly, a Cobra T2 cannot be used with an R1300A / R1300S2. Video modes may function normally, but 4th pair options will not.

At the transmitter end (refer to the transmitter user guide):

1.Connect the source video to the Cobra Series transmitter video input port, which is an HD15 connector labeled SOURCE IN or VIDEO IN.

2.If desired, attach a local monitor via the local monitor port to LOCAL OUT.

3.Make your audio/serial connections via the audio connector or DB9 connector as appropriate.

4.Connect the CAT 5 cable to the transmitter.

5.Apply power on the transmitter. The LED should light and, if there is a local monitor attached, a video image should appear on the monitor’s screen.

At the receiver end:

1.Connect the VIDEO OUT HD15 connector to the display unit and attach any audio (AUDIO/AUX I/O) or serial connections (RS-232) depending on the model of the Cobra CAT 5 Video System.

2.Connect the CAT 5 cable to the LINK INPUT connection. If daisy chaining units, connect the output CAT 5 cable to the LINK OUTPUT connection.

3.Apply power. The LED should light and video should appear on the display (make sure that the display is powered ON).

4.Adjust video levels and skew compensation.

5.Mount the R1300A / R1300S2 in a location that ensures the ventilation holes and fan are not blocked.

4

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Models Contents TablesIntroduction Getting Started OverviewOverview Setup and Installation Data Mode ConfigurationMaking the Connections Connections on the Single-Port VGA/Audio Transmitter ConnectionsConnections on the single-port VGA S2 Cobra R1300S2 Universal Receiver ConnectionsVideo Adjustment Adjustment locationsSolutions to Common Problems SolutionProblem Solution Appendix a Cabling Pinouts Terminal Block ConnectionDB9 Video Connector Pinout Appendix B Configuration Settings Configuration Jumper Settings Appendix D Setting Sync Mode Appendix E Skew Module Skew ModuleTechnical Specifications Video SupportPage 2900-650004 REV

Cobra R1300A specifications

Kramer Electronics has long been recognized for its commitment to innovation and quality in the AV industry. One of its standout products is the Cobra R1300A, a versatile and powerful solution designed for high-definition video and audio distribution. This device is particularly suited for professional applications, including live events, control rooms, and large conference spaces.

At the core of the Cobra R1300A is its ability to support a wide range of input and output formats. It features multiple HDMI inputs, which allow users to connect various sources such as laptops, cameras, and media players. The output capabilities include both HDMI and balanced audio, ensuring a seamless integration into any AV setup. The device natively supports high resolutions up to 4K at 60Hz, providing stunning image quality that meets the demands of today’s high-definition content.

One of the standout technologies of the Cobra R1300A is its advanced scaling feature. This technology automatically adjusts the input signal to match the output resolution, which simplifies operations and minimizes manual adjustments. This is particularly advantageous in dynamic environments where multiple sources may be in use.

The Cobra R1300A also incorporates a user-friendly interface, making it easy for operators of all skill levels to navigate and control. The front panel includes LED indicators that provide real-time feedback on signal status and active connections, which enhances usability and troubleshooting.

Furthermore, the device is built with robust connectivity options, including RS-232 and Ethernet control, allowing for integration into larger systems and remote management. This capability is essential for professional audiovisual environments where centralized control is necessary.

Another key characteristic of the Cobra R1300A is its compact design, which facilitates easy installation and placement in tight spaces. Additionally, it is engineered with thermal efficiency in mind, featuring built-in cooling mechanisms that ensure reliable performance during long operating hours without overheating.

In conclusion, the Kramer Electronics Cobra R1300A stands out as a reliable and feature-rich solution for professionals seeking high-quality video and audio distribution. Its advanced features, user-friendly interface, and robust connectivity options make it a preferred choice in demanding AV environments. Whether for corporate events, educational settings, or live performances, the Cobra R1300A delivers the performance and versatility that users expect from Kramer Electronics.
Top Page Image Contents