4.4 Connections on the single-port VGA S2
The Single-Port Cobra CAT 5 Video System series supports RS-232, video and stereo audio signals over CAT 5 cable. Serial signals are 3 wire RS232 (Tx, Rx, ground) and fixed at 9600 baud. Full 9 pin modem signals are not supported. Note when using the Cobra 2/S2 series with a Cobra CAT 5 DA or CAT 5 matrix switch, the serial is transmit only. There are no configuration changes required to the units. The serial application in use should be changed to transmit only. Audio is full stereo, line level. One or two separate channels of mono audio may also be used. See the Figures below for cabling connections.
Figure 3: Transmitter Connections
Figure 4: Cobra R1300S2 Universal Receiver Connections
6 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |