To adjust the volume level:
1.Turn the Encoder.
•The Volume screen is displayed with the Current Zone Selection Highlighted (remembered from previous use).
•The volume is adjusted in the highlighted Zone (or Zones) only.
2.If required, press the Encoder to highlight the next Zone to adjust its volume level.
While the Volume screen is displayed, each press of the Encoder will highlight available Zones in the following order:
Zone 1
Zone 2 
Zone 3 
Zone 4 
All Zones 
3.When finished, press the Menu key (or leave to time out) to save the current volume level and exit.
MUTING OUTPUT
To mute and unmute the volume:
Mute
•Press the Mute key to mute the audio output. The Mute icon is displayed over the top of the current input source screen.
•Press the Mute key again to unmute the audio output. The volume continues at the previously set level.
10