Fusion MS-IP700 manual Appendices, Troubleshooting

Page 59

APPENDICES

TROUBLESHOOTING

Problem

Solution

 

 

General

 

The unit does not respond to key presses.

Reset the unit by pressing the Reset button inside the control panel door.

What is the best way to prevent corrosion on my 700 Series chrome finish?

As with all products with a chrome finish exposed to the harsh marine environment, a little care will help to preserve the finish and prevent cor- rosion. FUSION recommends that you clean any salt water and/or salt residue from the front panel with a damp cloth soaked in fresh water.

Problem

Solution

 

 

SiriusXM

 

 

 

When I press

Ensure you have the MS700 Tuner region set to ‘USA’. Press Menu >

the tuner source

Settings > Tuner region > and select ‘USA’.

button the

• Ensure the SiriusXM module is plugged into the MS700.

SiriusXM screen

• Unplug the SiriusXM module and check the pins in the SiriusXM

is not displayed.

plug are not damaged.

 

 

SiriusXM

• Ensure the SiriusXM module is plugged into the MS700.

message: ‘Check

• Ensure the SiriusXM cable has not been damaged.

Tuner’

 

 

 

SiriusXM

• Ensure the antenna is plugged into the SiriusXM Tuner module.

message: ‘Check

• Ensure the antenna is not damaged.

Antenna’

• Ensure the antenna cable has not been damaged

 

 

SiriusXM

• Ensure the antenna is not damaged.

message: ‘No

• Ensure the antenna has a clear view of the sky and is not obscured.

Signal’.

• Ensure the antenna cable has not been damaged

 

 

58

Image 59
Contents Series Manual Handling CD or DVD disc’s MS-AV700 model only Using iPodCare and Maintenance USB Flash DrivesRegister Your Product Online Contents Page Source Play/Pause Forward Power Mute Clock BrightnessUser Interface and Controls Menu Tuner Auxiliary IPodYou can use the Menu key to open or to exit from menus Rotary Encoder and Menu KEYAccessing Menus Adjusting levelsGetting Started To power the unit on or offOpening Control Screens Adjusting Volume Level To mute and unmute the volume To adjust the volume levelTo set sub-woofer levels or tone Clock To clear the alarm To set the alarmTo adjust the brightness of the display screen Tuner To select one of the available tuner bandsExample SiriusXM input source screen To tune to a required frequency, channel or presetTuning Applies When tuning with this method… Method To… To remove one or more presets To add a new presetTo set the squelch level Turning scan mode onTo turn scan mode on Minimizing background noiseIPod To listen to input from your iPodSelecting tracks from a playlist Controlling Playback Searching To change a setting in the iPod settings menuRepeat ShuffleUSB Flash Drive To listen to music from your USB flash driveSubtitles Album artworkFor example, to select a Folder then track Selecting audio tracks from USB flash driveControlling playback Changing USB Flash Drive Settings To change a highlighted setting in the USB settings menuAuxiliary Input To listen to input from an alternate auxiliary deviceAdditional Features Fusion MS-NRX200 Remote ControlFUSION-only installation NMEA-2000 bus installationMS-AV700 model only DVD source not selected DVD source selectedDimensions top view Installing the 700 SeriesDimensions side view Description Colour ConnectionsEthernet Connection Zone 2 R RED Installation Series Connection Example To enable or disable the selected Zone Selecting and setting up a zoneEnabled Setting UP the 700 SeriesTo link Zone 2 level to Zone 1 level Volume controlTo enable or disable volume control Link to zoneName Volume limitSub-woofer level To specify the sub-woofer level for the selected ZoneTo enter the name for the selected Zone When using your iPod with either modelTo insert your iPod or USB flash drive MS-IP700 model Before inserting iPodTo connect your USB flash drive, you will need MS-AV700 modelTo connect your iPod, you will need MS-DKIPUSB Supported iPod sleeves Connecting auxiliary deviceAdjusting Auxiliary input level Audio quality Recommended settings are listed belowTo set the clock Activating your SiriusXM tuner To select 12 or 24 hour clock display modeTo select a channel SiriusXM menu optionsChannels To select a Category Special iconsCategory To enter Parental menu Parental modeTo change the Parental mode access code To lock or unlock a channel To access a locked channelChannel Locking / unlocking To set or unset a channel from being skipped Advanced SettingsChannel Skipping Sub filter Language Power save Key sound VHF region Tel muteTuner region Sources Factory ResetTo enable or disable the AM of VHF tuner sources To reset your 700 Series to factory default valuesAppendices TroubleshootingProblem Solution Problem Solution Wireless Remote App for iPad and iPhone FCC compliance statement General specificationsTuning range SpecificationsLicensing VHF tuning rangeSUPPORT, Sales and Service JapanIndexindex Output level Source screens Volume Page Page Page
Related manuals
Manual 36 pages 32.67 Kb Manual 72 pages 59.69 Kb