Fusion MS-IP700 manual Connections, Description Colour

Page 36

CONNECTIONS

DESCRIPTION	COLOUR
Battery +12VDC	Yellow
Accessory +12V switched	Red
Negative Ground	Black
Remote Amplifier Enable ouput	Blue/White
Dim input [12VDC active]	Orange
Telemute input [GND active]	Brown

Note: All +12V wiring MUST be fused at the power source end of your cable, with a 15 A fuse. When the red “Accessory +12V switched” wire is not required in your installation, it MUST be connected together with the Yellow “Battery +12V” wire at the MS-700 head unit wiring loom.

When connecting the Dim input ensure the wire gauge used is suitable for the fuse supplying the circuit being connected to.

ANTENNA CONNECTION

Connect an AM/FM marine antenna.

Note: Do Not Connect to a VHF splitter

AUX INPUT

Connect an Auxiliary source to the left and right RCA (White = L, Red = R).

VIDEO CONNECTION

(MS-IP700 iPod/iPhone video only, MS-AV700 DVD video only)

Connect the composite video output (Yellow = Video) to a TV / LCD monitor

USB CONNECTION (MS-AV700 only)

Connect an Apple sync cable (not included), or USB Flash Drive (not included) or connect the MS-DKIPUSB Portable Media Device Dock (not included)

Note: MS-IP700 has internal USB socket

NMEA2000 / WIRED REMOTE

For connection to a MS-NRX200 Remote (not included).

For connection to an existing NMEA2000 Bus a MS-N2KCONN is required (not included)

To install a new NMEA2000 Bus a MS-N2KSTART is required (not included)

35

Image 36

Contents Series Manual Using iPod Care and MaintenanceUSB Flash Drives Handling CD or DVD disc’s MS-AV700 model onlyRegister Your Product Online Contents Page Play/Pause Forward Power Mute Clock Brightness User Interface and ControlsMenu Tuner Auxiliary IPod SourceRotary Encoder and Menu KEY You can use the Menu key to open or to exit from menusAdjusting levels Accessing MenusTo power the unit on or off Opening Control ScreensGetting Started Adjusting Volume Level To adjust the volume level To mute and unmute the volumeTo set sub-woofer levels or tone Clock To set the alarm To clear the alarmTo adjust the brightness of the display screen To select one of the available tuner bands TunerTo tune to a required frequency, channel or preset Example SiriusXM input source screenTuning Applies When tuning with this method… Method To… To add a new preset To remove one or more presetsTurning scan mode on To turn scan mode onMinimizing background noise To set the squelch levelTo listen to input from your iPod IPodSelecting tracks from a playlist Controlling Playback To change a setting in the iPod settings menu RepeatShuffle SearchingTo listen to music from your USB flash drive SubtitlesAlbum artwork USB Flash DriveSelecting audio tracks from USB flash drive For example, to select a Folder then trackControlling playback To change a highlighted setting in the USB settings menu Changing USB Flash Drive SettingsTo listen to input from an alternate auxiliary device Auxiliary InputFusion MS-NRX200 Remote Control Additional FeaturesNMEA-2000 bus installation FUSION-only installationMS-AV700 model only DVD source selected DVD source not selectedInstalling the 700 Series Dimensions top viewDimensions side view Connections Description ColourEthernet Connection Zone 2 R RED Installation Series Connection Example Selecting and setting up a zone EnabledSetting UP the 700 Series To enable or disable the selected ZoneVolume control To enable or disable volume controlLink to zone To link Zone 2 level to Zone 1 levelVolume limit Sub-woofer levelTo specify the sub-woofer level for the selected Zone NameWhen using your iPod with either model To enter the name for the selected ZoneMS-IP700 model Before inserting iPod To insert your iPod or USB flash driveMS-AV700 model To connect your iPod, you will needTo connect your USB flash drive, you will need MS-DKIPUSB Connecting auxiliary device Adjusting Auxiliary input levelSupported iPod sleeves Recommended settings are listed below To set the clockAudio quality To select 12 or 24 hour clock display mode Activating your SiriusXM tunerSiriusXM menu options ChannelsTo select a channel Special icons CategoryTo select a Category Parental mode To change the Parental mode access codeTo enter Parental menu To access a locked channel Channel Locking / unlockingTo lock or unlock a channel Advanced Settings Channel SkippingSub filter To set or unset a channel from being skippedPower save Key soundLanguage Tel mute Tuner regionVHF region Factory Reset To enable or disable the AM of VHF tuner sourcesTo reset your 700 Series to factory default values SourcesTroubleshooting AppendicesProblem Solution Problem Solution Wireless Remote App for iPad and iPhone General specifications Tuning rangeSpecifications FCC compliance statementVHF tuning range SUPPORT, Sales and ServiceJapan LicensingIndexindex Output level Source screens Volume Page Page Page

Related manuals

Manual 36 pages 32.67 Kb

Manual 72 pages 59.69 Kb