Fusion MS-IP700 manual Selecting and setting up a zone, Enabled, Setting UP the 700 Series

Page 41

SETTING UP THE 700 SERIES

ZONES

Zone 1 and 2 are powered by the on board Class-D amplifier. External amplifiers are required to utilize the 4 line outputs and 4 subwoofer outputs. You can pre-set the balance, volume limit, sub-woofer level and name for each of the four Zones available on the 700 Series. If required, you can also:

•Enable or disable Zones 2, 3 and 4 (Zone 1 is always enabled).

•Enable or disable volume control (Zones 3 and 4 only).

•Link Zones 1 and 2.

•Disable the internal amplifiers for Zones 1 and 2. For example, if external amplifiers are used for Zones 1 and 2 the internal amplifiers can be disabled to reduce power consumption.

Selecting and setting up a zone

To select a Zone and modify its settings: 1. Press the Menu key.

2. Turn and then press the Encoder to select Settings > Zone.

3.Turn and then press the Encoder to select the Zone you wish to work with.

4.Use any of the following instructions to update settings for the selected Zone.

Enabled

Zones 2–4 can be disabled if required. This is useful, for example, if only two

Zones have been set up, as disabled Zones are not displayed in any screens when setting levels.

To enable or disable the selected Zone:

a.Select the Enabled menu item.

b.Press the Encoder to enable ( ) or disable ( ) the selected Zone.

c.Press any key to exit

To disable or enable the internal amplifiers for Zones 1 and 2: a. Select the Internal amplifier on menu item from the Zone menu.

b. Press the Encoder to disable ( ) or enable ( ) the amplifiers c. Press any key to exit

40

Image 41

Contents Series Manual Care and Maintenance Using iPodUSB Flash Drives Handling CD or DVD disc’s MS-AV700 model onlyRegister Your Product Online Contents Page User Interface and Controls Play/Pause Forward Power Mute Clock BrightnessMenu Tuner Auxiliary IPod SourceYou can use the Menu key to open or to exit from menus Rotary Encoder and Menu KEYAccessing Menus Adjusting levelsGetting Started To power the unit on or offOpening Control Screens Adjusting Volume Level To mute and unmute the volume To adjust the volume levelTo set sub-woofer levels or tone Clock To clear the alarm To set the alarmTo adjust the brightness of the display screen Tuner To select one of the available tuner bandsExample SiriusXM input source screen To tune to a required frequency, channel or presetTuning Applies When tuning with this method… Method To… To remove one or more presets To add a new presetTo turn scan mode on Turning scan mode onMinimizing background noise To set the squelch levelIPod To listen to input from your iPodSelecting tracks from a playlist Controlling Playback Repeat To change a setting in the iPod settings menuShuffle SearchingSubtitles To listen to music from your USB flash driveAlbum artwork USB Flash DriveFor example, to select a Folder then track Selecting audio tracks from USB flash driveControlling playback Changing USB Flash Drive Settings To change a highlighted setting in the USB settings menuAuxiliary Input To listen to input from an alternate auxiliary deviceAdditional Features Fusion MS-NRX200 Remote ControlFUSION-only installation NMEA-2000 bus installationMS-AV700 model only DVD source not selected DVD source selectedDimensions top view Installing the 700 SeriesDimensions side view Description Colour ConnectionsEthernet Connection Zone 2 R RED Installation Series Connection Example Enabled Selecting and setting up a zoneSetting UP the 700 Series To enable or disable the selected ZoneTo enable or disable volume control Volume controlLink to zone To link Zone 2 level to Zone 1 levelSub-woofer level Volume limitTo specify the sub-woofer level for the selected Zone NameTo enter the name for the selected Zone When using your iPod with either modelTo insert your iPod or USB flash drive MS-IP700 model Before inserting iPodTo connect your USB flash drive, you will need MS-AV700 modelTo connect your iPod, you will need MS-DKIPUSB Supported iPod sleeves Connecting auxiliary deviceAdjusting Auxiliary input level Audio quality Recommended settings are listed belowTo set the clock Activating your SiriusXM tuner To select 12 or 24 hour clock display modeTo select a channel SiriusXM menu optionsChannels To select a Category Special iconsCategory To enter Parental menu Parental modeTo change the Parental mode access code To lock or unlock a channel To access a locked channelChannel Locking / unlocking Channel Skipping Advanced SettingsSub filter To set or unset a channel from being skippedLanguage Power saveKey sound VHF region Tel muteTuner region To enable or disable the AM of VHF tuner sources Factory ResetTo reset your 700 Series to factory default values SourcesAppendices TroubleshootingProblem Solution Problem Solution Wireless Remote App for iPad and iPhone Tuning range General specificationsSpecifications FCC compliance statementSUPPORT, Sales and Service VHF tuning rangeJapan LicensingIndexindex Output level Source screens Volume Page Page Page

Related manuals

Manual 36 pages 32.67 Kb

Manual 72 pages 59.69 Kb