2.(if required) turn and then press the Encoder to select Parental > Unlock. Enter your access code.
3.Select the Lock/Unlock menu item.
4.Turn the Encoder to highlight a channel then press the Encoder to
lock ( 
) or unlock ( 
) the channel, as required.
5.Press the Menu key (or leave to time out) to exit.
Channel Skipping
Channel skipping gives the user the ability to set a channel to be skipped / missed while navigating via the Forward and Back key in the SiriusXM Source Screen. The user still able to navigate to a skipped channel via the channel list found in the menu.
To set or unset a channel from being skipped:
1.Press the Menu key.
2.(if required) turn and then press the Encoder to select Parental > Unlock. Enter your access code.
3.Select the Skip/UnSkip menu item.
4.Turn the Encoder to highlight a channel then press the Encoder to turn on
( 
) or turn off ( 
) skip, as required.
5.Press the Menu key (or leave to time out) to exit.
ADVANCED SETTINGS
The settings described in this section are usually set up when the unit is installed and not changed again.
Menu key
Rotary
Encoder
Sub filter
Use the sub filter setting to control the
54