Eclipse - Fujitsu Ten CD1000 manual Displaying CD text, Displaying title, Ejecting the disc

Operation

Displaying CD text

If the CD came with a logo shown below, it is recorded with a disc title and track titles. These information will be displayed during playback.

1 Press the [DISP] button.

Each time the button is pressed, the following will be displayed in order.

Track No & elapsed time ➔ Track No & clock ➔ Disc name ➔ Track name ➔ Track No & elapsed time www

CD TEXT recorded with characters other than alphanumeric and symbols cannot be displayed.

Displaying title

1 Press the [DISP] button.

Each time the button is pressed, the following will be displayed in order.

When “TAG DISP” is set to “TAG ON” (see page 23) :

Track No & elapsed time ➔ Track No & clock ➔ album/airtist tag(folder name*)

➔title tag(file name*) ➔ Track No & elapsed time …

*If an MP3/WMA file does not have ID3 tags, folder name and file name appear. In this case, the TAG indicator will not light up.

When “TAG DISP” is set to “TAG OFF” :

Track No & elapsed time ➔ Track No & clock ➔ Folder name ➔ File name ➔ Track No & elapsed time …

The display area shows a maximum of 8 characters and then scrolls to display the remaining characters.

After the folder name is displayed, the file name will be displayed by scrolling. After the file name is scrolled, the display will be fixed.

ATTENTION

This receiver can handle only one-byte characters. No other characters can correctly be displayed.

Ejecting the disc

1 Press the [ ] button.

The disc will be ejected.

16