NEC LCD93VXMTM, LCD73VXTM, LCD73VXM user manual Monitor AccuSync LCD93VXM Specifications

Specifications –continued

Monitor	AccuSync™ LCD93VXM
Specifications			Notes
LCD Module	Diagonal:	19.0 inch	Active matrix; thin film transistor
	Viewable Image Size:	19.0 inch	(TFT) liquid crystal display (LCD);
	Native Resolution		0.294 mm dot pitch; 300cd/m2
	(Pixel Count):	1280 x 1024	white luminence; 800:1 contrast
			ratio, typical
Input Signal	Video:	Analog RGB 0.7 Vp-p/75 Ohms	Digital Input: DVI
	Sync:	Separate sync TTL Level (Positive/Negative)
	Audio Input:	Stereo Mini Jack 1V rms Input
Output Signal	Headphones:	Stereo Mini Jack
Display Colors		16.7M	Depending on display card used.
Maximum Viewing Angles	Left/right:	80°/80° (CR>10)
	Up/Down:	80°/80° (CR>10)
Synchronization Range	Horizontal:	31.5 kHz to 81.1 kHz	Automatically
	Vertical:	56 Hz to 76 Hz	Automatically
Resolutions Supported		720 x 400*1 : VGA text	Some systems may not support
		640 x 480*1 at 60 Hz to 75 Hz	all modes listed.
		800 x 600*1 at 56 Hz to 75 Hz
		832 x 624*1 at 75 Hz
		1024 x 768*1 at 60 Hz to 75 Hz
		1152 x 864*1 at 70 Hz to 75 Hz
		1152 x 870*1 at 75 Hz
		1280 x 960*1 at 60 Hz to 75 Hz
		1280 x 1024 at 60 Hz to 75 Hz........ NEC DISPLAY SOLUTIONS cites
			recommended resolution at 60 Hz
			for optimal display performance.
Active Display Area	Horizontal:	376mm/14.8 inches
	Vertical:	301mm/11.9 inches
Power Supply		100-240 V ~ 50/60 Hz
Current Rating		0.75 - 0.4 A/100-240V
		1.5A/100-240V (for Mexico)
Speaker Practical Audio Output		1+1 watts
Dimensions		405.5mm (W) x 405.5mm (H) x 222.0mm (D)
		16.0 inches (W) x 16.0 inches(W) x 8.7 inches (D)
Weight		4.7kg
		10.4lbs
Environmental	Operating Temp.:	5°C to 35°C/41°F to 95°F
Considerations	Humidity:	10% to 80%
	Altitude:	0 to 10,000 Feet
	Storage Temperature:	-10°C to +60°C/14°F to 140°F
	Humidity:	10% to 85%
	Altitude:	0 to 40,000 Feet

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current fl at panel technologies when displaying non-native resolutions full screen. In fl at panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

NOTE: Technical specifications are subject to change without notice.

16