9. Adjust the image (See pages 20-28)
Make adjustments when picture adjustment such as the brightness or contrast is required.
10. Recommended Adjustment
To reduce the risk of Òimage persistenceÓ, please adjust the following items based on the application being used.
ÒSCREEN SAVERÓ (See page 24), ÒSIDE BORDER COLORÓ (See page 24), ÒDATE & TIMEÓ (See page 28), ÒSCHEDULEÓ (See page 28).
11. Installing and removing stand
CAUTION: Installing and removing the stand must be done by two or more people. It is recommended that 4 people install and remove the stand, due to its weight of almost 63.0kg.
How to install stand
1.Please turn monitor off.
2.Place stand onto monitor with the long ends of the feet in front of the monitor.
3.After inserting stand in guide block, fasten thumbscrews on both sides of the monitor.
How to remove the stand
1.Spread the protective sheet on the flat surface, such as a desk.
2.Place monitor on the protective sheet.
3.Remove thumbscrews with a screwdriver or with your fingers and place them in a safe place for reuse.
Thumbscrews
Stand
CAUTION: Handle with care when mounting the display stand and avoid pinching your fingers.
NOTE: Place stand onto monitor so that the long end of the feet are in the front.
How to use the attached speaker plug
Standard cable
Speaker plug
Insert the negative
Fixed cable and speaker plug.
Insert the fixed cable and speaker plug to the speaker terminal.
12. When using external speakers
We recommend to using the option speakers designed for the MultiSync LCD5710.
The external speaker terminals of the MultiSync LCD5710 may be connectable with the speaker plug of a mainframe sound speaker.
It this case, please exchange the lead connector of a mainframe sound speaker for an attached speaker plug.
Downloaded From