NEC LCD5710 user manual Mounting on Wall or Ceiling

Page 37

Mounting on Wall or Ceiling

DO NOT mount the monitor yourself. Please ask dealer.

For proper installation it is strongly recommended you use a trained, qualified technician.

Please inspect the location where the unit is to be mounted. Not all walls or ceilings are capable of supporting the weight of the unit.

Product warranty does not cover damage caused by improper installation, remodeling, or natural disasters. Failure to follow these recommendations could result in voiding the warranty.

To insure safe installation, use two or more brackets to mount the unit to at least two points on the installation location.

Please note the following when mounting on wall or ceiling

Unit

Mounting

¥ When using mounting accessories other than NEC compliant and approved, they must

 

Bracket

comply with the VESA-compatible (FDMIv1) mounting method.

 

 

¥NEC strongly recommends using screws M8 size (15mm + bracket). If using screws longer

than 15mm, check the depth of the hole. (Recommended Fasten Force: 1125-1375N¥cm)

 

 

 

 

 

 

Screw

 

 

 

 

 

 

 

NEC recommends using mounting interfaces that comply with UL1678 standard in

15mm

 

 

 

 

 

Thickness

 

 

 

 

 

North America.

 

 

 

 

 

 

 

 

 

 

 

 

of Bracket

 

 

 

 

 

 

 

¥

Mounting on wall or ceiling is the customerÕs responsibility.

Screw length should equal

¥

Prior to mounting, please inspect the installation location to insure that the location is

depth of hole (15mm) + the

 

strong enough to support the mounted unit and that the unit will be safe from harm.

 

thickness of mounting bracket.

 

 

¥DO NOT block ventilated openings by mounting accessories or other items too close.

¥Refer to the manual included with the mounting equipment for detailed instructions.

Orientation

¥DO NOT use this monitor in the portrait position. Doing so may cause failure and void the warranty.

Mounting location

¥ The ceiling and wall must be strong enough to support the monitor and mounting accessories.

¥ DO NOT install in locations where a door or gate can hit the unit. Do not install in areas with lots of vibrations and dust. DO NOT install near where the main power supply enters into the building. Doing so may cause fire and the electric shock.

¥Do not place where people can easily grab and hang onto the unit or mounting apparatus.

¥When mounting in a recessed area, as in a wall, leave at least 4 inches (10cm) of space between the monitor and the wall for ventilation.

¥Allow adequate ventilation or air-conditioning around the monitor, so that heat can properly dissipate away from the unit and mounting apparatus.

Mounting on ceiling

¥Ensure that the ceiling is constructed strong enough to support the weight of the unit and mounting apparatus over time against earthquakes, unexpected vibration and other external forces.

¥Be sure that the unit is mounted to a solid structure within the ceiling such as a support beam. Secure the monitor using the bolt, spring lock washer, washer and nut.

¥DO NOT mount to areas that have no supporting internal structure. Do not use wood screws or anchor screws for mounting. DO NOT mount the unit to the baseboard or to hanging fixtures.

Maintenance

¥Check for loose screws, gaps, distortions or other abnormalities. If an abnormality is detected please refer to service person.

¥Over time, the mounting location may become weaker. Please check regularly.

English-35

English

Downloaded From TV-Manual.com Manuals

Image 37
Contents MultiSync LCD5710 Advanced Option IndexFCC Information Canadian Department of Communications Compliance StatementEnglish-1 Declaration Important InformationDisposing of your old NEC product Declaration of the ManufacturerRecommended Use Safety Precautions, Maintenance & Recommended UseErgonomics English-3Contents Control Panel Parts Name and FunctionsTerminal Panel Wireless Remote Control Handling the remote control Operating Range for the Remote ControlEnglish-8 Setup Procedure Recommended Adjustment Adjust the image See pagesInstalling and removing stand How to use the attached speaker plugHow to Mount and Attach Options to the LCD Monitor Connections Wiring DiagramBefore making connections English-12Connect the LCD Monitor to a Personal Computer Connecting a Personal ComputerEnglish-13 Connect the LCD Monitor to Macintosh Connecting to a Macintosh ComputerEnglish-14 Connect the LCD Monitor to a Computer with a Digital Output Connecting with Digital Interface EquipmentEnglish-15 Connect the LCD Monitor to a DVD Player Connecting a DVD Player with component outEnglish-16 Connect the LCD Monitor to a Stereo Amplifier Connecting to a Stereo AmplifierEnglish-17 Pressing the power button Power on and OFF ModesUsing the remote control Pressing the Main Power Switch Basic OperationUsing Power Management Power IndicatorPicture Mode Selecting a video sourcePicture OSM On-Screen-Manager ControlsEnglish-20 English-21 TintZoom Mode ResolutionScreen Reset AudioEnglish-23 Picture in PictureReset ConfigurationFactory Reset Screen SaverDVI Mode OFF TimerLong Cable ManualMonitor Input DetectInformation Advanced OptionFilm Mode Scan ModeImage Flip Scan ConversionImage Sticking of LCD Panel For long life use of Public DisplayRecommendations Connect a PC and MultiSync LCD5710 English-29Set Monitor ID English-30 ConnectionEnglish-31 Õ0Õ Õ0Õ Õ!Õ Õ Õ Power onEnglish-32 FeaturesEnglish-33 TroubleshootingProduct Specifications SpecificationsEnglish-34 Analog Input Digital InputMounting on Wall or Ceiling Pin Assignment Pin Assignment of DVI connectorEnglish-36 Mini D-SUB 15P
Related manuals
Manual 2 pages 56.01 Kb