NEC LCD5710 user manual Image Flip, Scan Mode, Scan Conversion, Film Mode, Monitor ID, IR Control

	ADVANCED OPTION	IMAGE FLIP							Selects the image flipping or rotation.
	S-VIDEO MODE		H MIRROR						NORMAL: Normal display.
	BLACK LEVEL EXPANSION
			NORMAL
IMAGE FLIP	GAMMA SELECTION		V MIRROR						H MIRROR: Mirror image for horizontal direction.
	IMAGE FLIP
			ROTATE
	SCAN MODE
	SCAN CONVERSION								V MIRROR: Mirror image for vertical direction.
	FILM MODE
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU			:SEL		EXIT :RETURN MENU :EXIT MENU			ROTATE: Rotate the image 180 degrees.
	ADVANCED OPTION								Changes the display area of the image.
	S-VIDEO MODE	SCAN MODE
	BLACK LEVEL EXPANSION
SCAN MODE	GAMMA SELECTION								OVERSCAN: Set to display area about 95%
	IMAGE FLIP			OVERSCAN		/	UNDERSCAN
	SCAN MODE
	SCAN CONVERSION		+ -: SEL			EXIT :RETURN MENU :EXIT MENU			UNDERSCAN: Set to display area about 100%
*:INPUT DVD/HD, VIDEO only	FILM MODE
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
									Selects IP (Interlace to Progressive) converter function.
	ADVANCED OPTION								PROGRESSIVE: Enable the IP function, to convert
	S-VIDEO MODE	SCAN CONVERSION
	BLACK LEVEL EXPANSION								interlace signal to progressive. Normally use this setting.
SCAN CONVERSION	GAMMA SELECTION
	IMAGE FLIP	PROGRESSIVE				/	INTERLACE
	SCAN MODE								INTERLACE: Disable the IP function.
	FILM MODE
	SCAN CONVERSION
			+ -: SEL			EXIT :RETURN MENU :EXIT MENU			NOTE: This mode is better suited for motional pictures,
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
									but it is in danger of image retention.
									Selects Film mode function.
	ADVANCED OPTION								AUTO: Enable the Film mode function. This mode is
	S-VIDEO MODE	FILM MODE							better suited for movies, which is converted 24 Frames/
	BLACK LEVEL EXPANSION
FILM MODE	GAMMA SELECTION
	IMAGE FLIP				AUTO	/	OFF		sec source to DVD Video. We recommend to select
	SCAN MODE
	SCAN CONVERSION								ÒPROGRESSIVEÓ in ÒSCAN CONVERSIONÓ.
	FILM MODE
			+ -: SEL			EXIT :RETURN MENU :EXIT MENU
*:INPUT DVD/HD, VIDEO only	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU								OFF: Disable the Film mode function. This mode is
									better suited for Broadcasting or VCR source.
	ADVANCED OPTION								Set the Monitor ID number to control the daisy chained
									multiple MultiSync LCD5710 with RS-232C.
	MONITOR ID	MONITOR ID
MONITOR ID	IR CONTROL
	TILE MATRIX			ID No.			1
	POWER ON DELAY
	HEAT STATUS
	DATE & TIME
	SCHEDULE								The Monitor ID number is selectable between 1 and 26.
	ADVANCED OPTION RESET		+ -: SEL			EXIT :RETURN MENU :EXIT MENU
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
									Selects the infrared wireless remote controller mode
									with using the RS-232C daisy chain.
									The item in this menu will become effective by pressing
									ÒSETÓ button on the selected item.
									NORMAL: The monitor will be controlled normally by
	ADVANCED OPTION	IR CONTROL							wireless remote controller.
	IR CONTROL		NORMAL						PRIMARY: Set ÒPRIMARYÓ at the head of the daisy
			PRIMARY
	MONITOR ID
IR CONTROL	TILE MATRIX		SECONDARY						chained monitors by RS-232C.
	POWER ON DELAY		LOCK
	HEAT STATUS
	DATE & TIME								SECONDARY: Set ÒSECONDARYÓ after 2nd daisy
	SCHEDULE
	ADVANCED OPTION RESET
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU	:SEL SET :SET				EXIT :RETURN MENU :EXIT MENU			chained monitor.
									LOCK: Disable the monitor control by infrared wireless
									remote controller.
									Keep pressing ÒDISPLAYÓ button during 5 sec or more,
									this setting will return to ÒNORMALÓ.
									Tile Matrix demonstrates multiple screens. This feature
									provides a single large screen using up to 25 monitors.
									It will be able to divide up to 5 each H and V.
									This requires you to feed the PC output into each of the
									monitors through a distributor.
	ADVANCED OPTION	TILE MATRIX							H MONITORS: Select number of horizontal divide.
									V MONITORS: Select number of vertical divide.
	MONITOR ID		H MONITORS				1
TILE MATRIX	IR CONTROL		V MONITORS				1		POSITION: Select a position to expand the screen.
	TILE MATRIX		POSITION				1	NO
	POWER ON DELAY		TILE COMP				YES /
	HEAT STATUS
	DATE & TIME		ENABLE				YES /	NO	TILE COMP: Works in tandem with Tile Matrix to
	SCHEDULE
	ADVANCED OPTION RESET			:SEL			EXIT :RETURN		compensate for the width of the tile bezels in order to
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU		+ -: ADJ				MENU :EXIT MENU
									accurately display the image.
									ENABLE: Select ÒYESÓ, the monitor will expand the
									selected position.
									PIP, POP, SIDE by SIDE and STILL and ÒDYNAMICÓ
									ZOOM mode will be disabled when ÒTILE MATRIXÓ is
									activated.

English

English-27

Downloaded From TV-Manual.com Manuals