NEC LCD5710 user manual Terminal Panel

Terminal Panel

1AC IN connector

Connects with the supplied power cord.

2RGB 1 IN (DVI-D)

To input digital RGB signals from a computer or HDTV device having a digital RGB output.

* This connector does not support analog input.

3RGB 2 IN (mini D-Sub 15 pin)

To input analog RGB signals from a personal computer or other RGB equipment.

4RGB 3 [R, G, B, H, V] (BNC)

IN connector: To input analog RGB signals or signals from other RGB equipment.

This is also to connect equipment such as a DVD player and HDTV laser disk player. A Sync-on-Green signal can be connected to the G connector.

5RGB OUT connector (BNC)

To output the signal from RGB 3.

6DVD/HD connector (BNC)

Connecting equipment such as a DVD player, HDTV device, or Laser disc player.

7AUDIO IN 1, 2, 3

To input audio signal from external equipment such as a computer, VCR or DVD player.

8AUDIO OUT

To output the audio signal from the AUDIO IN 1, 2 and 3 jack.

9VIDEO INPUT/OUTPUT Connector

VIDEO IN connector (BNC and RCA): To input a composite video signal. BNC and RCA connectors are not available at the same time. (Use only one input).

VIDEO OUT connector (BNC): To output the composite video signal from the VIDEO IN connector.

S-VIDEO IN connector (DIN 4 pin): To input the S-video (Y/C separate signal). See page 26, S-VIDEO MODE SETTING.

10EXTERNAL CONTROL (mini D-Sub 9 pin)

IN connector: Use when operating the LCD monitor from the RGB equipment like a computer.

Out connector: To connect multiple MultiSync LCD5710.

11EXTERNAL SPEAKER TERMINAL

To output the audio signal from AUDIO 1, 2 or 3 jack.

English-6

Downloaded From TV-Manual.com Manuals