Adjusting the tone
Enhancement of bass and treble (EX.BASS / LOUDNESS)
AUTO/MANU |
|
|
|
MD O.T.E. | DISPLAY | TIME DISPLAY | TAPE O.T.E. |
SOUND | TONE | TIMER | SLEEP |
SOUND |
|
|
|
MUTE |
| VOLUME |
|
SOUND |
Press the SOUND key repeatedly until the desired tone enhance- ment is lit.
"EX. BASS" is lit : Enhances the bass tone regardless of the current vol- ume.
"LOUD"(LOUDNESS) is lit : Enhances both the bass and treble tones ac- cording to the current volume.
(Effective during
Both "EX. BASS" and "LOUD" are off (SOUND MODE OFF) : Bass and treble
set using the TONE function.
Display when EX. BASS is selected
EX. BASS E X . B A S S O N
"EX. BASS" lit
Display when LOUDNESS is selected
EX. BASS L O U D N E S S O N
"LOUD" lit
Fine adjustment of bass and tre- ble (TONE)
SOUND TONE TIMER SLEEP
TONE
VOLUME
MUTEVOLUME
Remote control unit only
1Press the TONE key on the remote repeatedly until "BASS" or "TRE- BLE" is displayed.
"BASS" : Low frequency level adjust- ment.
"TREBLE" : High frequency level adjust- ment.
Display when BASS is selected
B A S S | - 2 |
2Adjust the VOLUME keys to the desired level.
The high or low frequency level can be adjusted in the range between
3Press the SET key.
If the remote is left without pressing the SET key for about 8 seconds after adjustment, the adjusted setting is entered in memory and the display re- turns to the previous information.
÷The EX. BASS or LOUDNESS mode is canceled if the bass or treble level is adjusted while "EX. BASS" or "LOUD" is lit.
÷The effects of EX.BASS and LOUDNESS are not reflected in the recorded audio.
28 EN