Recording onto TAPE
The tape deck of the system can record any music source including CD and radio.
|
| 7 STOP | |
AUX |
|
| VOLUME / |
4 | 4 |
| MENU |
TAPE |
|
TAPE REC CD 6 | SET |
MD 6
TAPE 23
TUNER FM /AM
Main unit only
1Make preparation for recording.
See steps 1 and 3 to 5 of "Recording CD onto TAPE" (pages 22 & 23).
2Select the source to be recorded.
CD | : Press the CD 6 key. |
MD | : Press the MD 6 key. |
Radio : Press the TUNER FM/AM key.
AUX component : Press the AUX key.
If a CD or MD has already been loaded in advance, it starts to be played auto- matically now. press the 7STOP key to stop it.
3When the source to be recorded is ready, press the TAPE REC key.
Example : Recording CD onto TAPE
STEREO
EX. BASS C D
Tape recording indicator
4Start playing the source to be re- corded.
To stop recording :
Press the 7STOP key.
To let recording pause :
When the TAPE REC key is pressed during recording, recording pauses after leaving a
Tip for recording CD or MD onto tape
When the cassette deck is put to record- pause mode, the start of tape recording can be started in synchronism with the start of playback of the CD or MD source. (Sync re- cording)
(1)Put the CD player or MD recorder of the system to pause
(2)Select the track to be recorded first by pressing the 4 or ¢ key.
The CD player or MD recorder enters pause
(3)Press the TAPE REC key twice. The cassette deck enters
(4)Start playback of the CD or MD.
÷The cassette deck of the system is capable of recording only the normal (TYPE I) tapes. High (TYPE II) and metal (TYPE IV) position tapes cannot be used.