EM_550_G2.book Seite 49 Donnerstag, 27. November 2003 1:33 13
Guide the BNC cable with the BNC connector through the hole on the rack mount “ear”.
Hook the two rack mount “ears” to the rear panel of the twin receiver.
Secure the rack mount “ears” to the twin receiver using two of the supplied recessed head screws (M 3x6) respectively.
Screw the two BNC sockets | to the antenna holders | using the |
supplied plain washers and nuts. |
|
|
Screw the two antenna holders | to the handles of the twin receiver. |
Connect the two BNC connectors | to the BNC sockets (ANT II) and |
(ANT I) at the rear of the twin receiver. | |
Slide the twin receiver into the 19” rack. | |
Secure the rack mount “ears” to the rack. | |
Connect the telescopic antennas | to the BNC sockets . |
Pull the telescopic antennas out and align them upwards in a
Note:
Use remote antennas (available as accessories) when the receiver position is not the best antenna position for optimum reception.
49