Sennheiser EM 550 G2 manual Working with the operating menu

Page 16

EM_550_G2.book Seite 52 Donnerstag, 27. November 2003 1:33 13

Working with the operating menu

By way of example of the “Tune” menu, this section describes how to use the operating menu. The operating steps for adjusting the settings via the menu are similar for both receivers of the EM 550 G2.

After switching the receiver RX A or RX B on, the standard display is shown on the display panel.

Getting into the operating menu

Press the SET button to get from the standard display into the operating menu. The last selected menu and its current setting are displayed with a background.

Selecting a menu

Press the / rocker button to select a menu.

Press the SET button to get into the setting mode of the selected menu.

The name of the menu and its current setting are displayed.

Adjusting a setting

Press the / rocker button to adjust the setting. The new setting becomes effective immediately.

By briefly pressing the / rocker button, the display jumps either forwards or backwards to the next setting. In the “Channel”, “Tune” and “Name” menu, the / rocker button features a “fast search” function. If you hold down a button, the display cycles continuously, allowing you to get fast and easily to your desired setting.

Storing a setting

Press the SET button to store the setting. “Stored” appears on the display, indicating that the setting has been stored. The display then returns to the top menu level.

Exiting the operating menu

Select the “Exit” menu to exit the operating menu and to return to the standard display.

When in the operating menu, briefly pressing the ON button will cancel your entry (ESC function) and return you to the standard display with the last stored settings.

52

Image 16
Contents EM550 Thank you for choosing Sennheiser Contents EM 550 G2 twin receiver Channel bank systemSafety instructions Delivery includesAreas of application Overview of operating controls Indications and displays of the receivers Indications and displaysRemote displays of an ew 500 G2 transmitter Mute display Modulation displayConnecting the antennas Connecting and mounting remote antennasPreparing the receiver for use Mounting the receiver feetDaisy-chaining up to eight twin receivers Connecting the mains cableEssential notes on mounting remote antennas Connecting the amplifier/mixing console Service interfacesMounting the twin receiver into a 19 rack Mounting the antennasEM550G2.book Seite 49 Donnerstag, 27. November 2003 133 Using the twin receiver Switching the twin receiver on/offConnecting the headphones/adjusting the volume Activating/deactivating the lock modeButtons Operating menuOverview of menus Working with the operating menu Menu Bank MenuSET Menu Reset Adjustment tips for the operating menu BankChannel TuneScanning the channel banks for free channels ScanDisplaying a list of all free channels Starting the scanAdjusting the audio output level Adjusting the squelch thresholdMulti-channel operation AF OutDoing the soundcheck SoundcheckSelecting the standard display DisplayEntering a name NameLoading the factory-preset default settings ResetActivating/deactivating the pilot tone evaluation PilotUsing the equalizer Adjusting the contrast of the graphic displayEqualizer Exiting the operating menuTroubleshooting Error checklistCare and maintenance Recommendations and tipsFor optimum reception For multi-channel operationAdditional information Wireless transmission systemsHDX noise reduction Pilot tone squelch SquelchField strength-dependent squelch Diversity reception Specifications Accessories Connector assignmentEM550G2.book Seite 212 Donnerstag, 27. November 2003 133