Sennheiser EM 550 G2 manual Indications and displays of the receivers

EM_550_G2.book Seite 44 Donnerstag, 27. November 2003 1:33 13

Indications and displays

Each receiver of the EM 550 G2 provides information on its own operating states and those of the received ew 500 G2 transmitter (remote displays).

Indications and displays of the receivers

“PILOT” display
The “PILOT” display	appears on the display panel when the pilot tone

evaluation is activated (see “Activating/deactivating the pilot tone evaluation” on page 61).

Diversity display

The receivers operate on the true diversity principle (see “Diversity reception” on page 67).

The diversity display indicates whether diversity section I (i.e. antenna 1) or diversity section II (i.e. antenna 2) is active.

Button backlighting
During standby operation, the ON button	is backlit in red. When the
receiver is switched on, the SET button	and the / button	are
additionally backlit in green.

Remote displays of an ew 500 G2 transmitter

Transmitter battery status indication
The 4-step transmitter battery status display	provides information on the
remaining battery/accupack capacity of the received ew 500 G2 transmitter:

3 segments:	capacity approx. 100 %
2 segments:	capacity approx. 70 %
1 segment:	capacity approx. 30 %
Battery icon flashing	LOW BAT
	In addition, the text “LOW BAT” (backlit in red)
	flashes in alternation with the standard display.

44