Sennheiser EM 550 G2 manual Selecting the standard display, Display, Entering a name, Name

EM_550_G2.book Seite 60 Donnerstag, 27. November 2003 1:33 13

Selecting the standard display

Display	Via the “Display” menu, you can select the standard display:
	Selectable standard display	Contents of the display
	“Main”
	(standard display)

“Frequency”

(display of the frequency)

“Bank/Channel”

(display of the channel bank and channel number)

“Name”

(display of the freely selectable name)

“AF meter”

(graphic display of the AF level)

“Second RF”

(display of the RF levels of the two diversity sections)

	Entering a name
Name	Via the “Name” menu, you can enter a freely selectable name for the receiver.
	You can, for example, enter the name of the performer for whom the
	adjustments have been made.
	The name can be displayed on the standard display and can consist of up to
	ten characters such as:
	y letters (without pronounciation marks),
	y numbers from 0 to 9,
	y special characters e.g. () - . _ and spaces.
	To enter a name, proceed as follows:
	Press the SET button to get into the setting mode of the “Name” menu.
	The first segment starts flashing on the display.
	With the / buttons you can now select a character. By briefly pressing
	a button, the display jumps either forwards or backwards to the next
	character. If you hold down a button, the display starts cycling
	continuously.

60