Topfield HV7700 HSCI manual To use the Scart connector

Page 18

12 Setup

To use the SCART connector

For best results with a standard television set, you should use a SCART cable, plugging one end into the TV socket on the digital re- ceiver and the other end into a free SCART socket on your television.

Some televisions have inputs via Com- ponent or S-Video connectors rather than

SCART.

If you have such a television, use an appropriate conversion cable to link the TV socket on the digital receiver to the match- ing socket on your television.

If you connect with a standard SCART cable, you do not have to make audio connections because the SCART connector can output stereo audio. But if you use a conversion cable, such as SCART-to-Component, you have to make audio connections.

NOTE

You cannot view high deﬁnition video with the SCART con- nector.

To use the component video connector

Y

Pb Pr

You will need to obtain a component video cable (RCA cable) to use the component video connector. Plug one end of the ca- bles into the Y (green), Pb (blue) and Pr (red) sockets on the digital receiver, and the other end into the matching sockets on your tele- vision.

Image 18

Contents TF 7700 Hsci Page Contents Service Search Index Page Features IntroductionControlling the digital receiver Front panelControlling the digital receiver Remote control Button sets a sleep timer Button mutes the sound. Press again to switch itDio services These buttons have different functions per menu. TheyWhat is common interface? To watch a pay service, you should take the following stepsPlease read the following safety precautions carefully SetupSafety precautions UnpackingSetup Rear panel connections TF 7700 Hsci has some connections on the back panelConnecting up your digital receiver Connecting the antennaConnecting to your television To use the Hdmi connectorTo use the Scart connector Connecting to your video cassette recorder To use the composite video connectorInserting batteries in the remote control Preference Settings Language settingsVideo and audio settings Colour modelVideo cassette recorder Television aspect ratioHigh deﬁnition television Local time setting Sound modePreference Settings Local time setting Time offset table City Parental control Adjusting the on-screen display Service Search Searching broadcasting services1 Conﬁguring LNB settings Searching broadcasting services 2 Conﬁguring DiSEqC 1.2 settings Searching broadcasting services 3 Conﬁguring Usals settings Searching services Service Search OK Editing the transponder list Resetting to factory settings Resetting to installer settingsService Search Watching television Volume controlDaily Usage LevelButton performs an alphabetic browse. For When the highlight bar is on an entry of which initialDown Button skips over 10 entries up or Button puts the highlight bar on the ﬁrstWatching television Button After you have Favourite services listFavourite services Button. ToViewing programme information Press Button continuously unReaches your desired level Selecting audio tracks Button, and adjust its transparency withViewing electronic programme guide Selecting subtitle tracksPress Button. To switch to Highlight bar on your choice with ButtonMaking timer events Watching multifeed programmeYour desired satellite Making timer events Column and press the Listing ServicesEditing the services list Vice to edit on Right column. To go over to the other col§ 6.3 for how to use the on-screen keyboard Editing the favourite list Each column How to use on-screen keyboard Transferring receiver dataTransferring receiver data Firmware Update From a USB storage From your computer via RS-232 portFrom another digital receiver via RS-232 port From another digital receiver via RS-232 port Index LNB OUT Usals Page Correct disposal of this product