Topfield HV7700 HSCI manual From another digital receiver via RS-232 port

Page 58

52 Firmware Update

To update the firmware with this method, perform the follow- ing steps:

1.Download a new firmware applicable to the digital receiver from the Topfield web site.

2. Turn off the digital receiver.

3. Plug one end of a RS-232 cable (9 pin D- sub cable) into the RS-232 port on the digital receiver, and the other end into the matching port on your computer.

4.Run TFD-Down.

The instructions on how to use TFD-Down are as follows:

1.Press the Find button to select the new firmware file.

2.Press the Download button.

3.To start the file transfer, turn on the digital receiver.

4.When the file transfer is complete, the display panel on the digital receiver will count down to zero while the new firmware is being applied.

5.Restart the digital receiver.

7.3From another digital receiver via RS-232 port

It is possible to transfer a new firmware to the digital receiver from another same digital receiver by connecting them with a RS-232 cable.

To update the firmware with this method, perform the follow- ing steps:

Image 58
Contents TF 7700 Hsci Page Contents Service Search Index Page Features IntroductionControlling the digital receiver Front panelControlling the digital receiver Remote control Button sets a sleep timer Button mutes the sound. Press again to switch itDio services These buttons have different functions per menu. TheyWhat is common interface? To watch a pay service, you should take the following stepsPlease read the following safety precautions carefully SetupSafety precautions UnpackingSetup Rear panel connections TF 7700 Hsci has some connections on the back panelConnecting up your digital receiver Connecting the antennaConnecting to your television To use the Hdmi connectorTo use the Scart connector Connecting to your video cassette recorder To use the composite video connectorInserting batteries in the remote control Preference Settings Language settingsVideo and audio settings Colour modelVideo cassette recorder Television aspect ratioHigh definition television Local time setting Sound modePreference Settings Local time setting Time offset table City Parental control Adjusting the on-screen display Searching broadcasting services Service Search1 Configuring LNB settings Searching broadcasting services 2 Configuring DiSEqC 1.2 settings Searching broadcasting services 3 Configuring Usals settings Searching services Service Search OK  Editing the transponder list Resetting to factory settings Resetting to installer settingsService Search Watching television Volume controlDaily Usage LevelButton performs an alphabetic browse. For When the highlight bar is on an entry of which initialDown Button skips over 10 entries up or Button puts the highlight bar on the firstWatching television Button After you have Favourite services listFavourite services Button. ToPress Button continuously un Viewing programme informationReaches your desired level Selecting audio tracks Button, and adjust its transparency withViewing electronic programme guide Selecting subtitle tracksPress Button. To switch to Highlight bar on your choice with ButtonWatching multifeed programme Making timer eventsYour desired satellite Making timer events Column and press the  Listing ServicesEditing the services list Vice to edit on Right column. To go over to the other col§ 6.3 for how to use the on-screen keyboard Editing the favourite list Each column How to use on-screen keyboard Transferring receiver dataTransferring receiver data Firmware Update From a USB storage From your computer via RS-232 portFrom another digital receiver via RS-232 port From another digital receiver via RS-232 port Index LNB OUT Usals Page Correct disposal of this product