Topfield HV7700 HSCI manual From a USB storage, From your computer via RS-232 port

Page 57

7.1 From a USB storage 51

7.1From a USB storage

If you have a USB storage, you can update the ﬁrmware from it. To update the ﬁrmware from your USB storage, perform the following steps:

1.Download a new ﬁrmware from the Topﬁeld web site.

2.Copy the ﬁrmware ﬁle to your USB storage.

3.Insert the USB storage into the USB port on the digital receiver.

4.Select the Installation > USB Firmware Upgrade menu, then the ﬁles in the USB storage are listed.

5.Place the highlight bar on the right ﬁrmware ﬁle and press the OK button, then a countdown will be dis- played on the front of the digital receiver.

6.When ‘END’ message appears, restart the digital re- ceiver.

NOTE

Your USB storage must be formatted in the FAT ﬁle system. If not, the digital receiver cannot recognize your USB storage. In addition, the digital receiver can only recognize ﬁles and di- rectories which are named with only alphabetic, numeric and underscore letters. If there is a ﬁle or forlder named with other letters, the digital receiver cannot recognize not only it but also the subsequent ﬁles and folders.

7.2From your computer via RS-232 port

It is possible to transfer a new ﬁrmware to the digital receiver from your computer by connecting them with a RS-232 cable. You need TFD-Down, a ﬁrmware transfer utility for this, which is available from the web site, http://www.i-topfield.com.

Image 57

Contents TF 7700 Hsci Page Contents Service Search Index Page Introduction FeaturesFront panel Controlling the digital receiverControlling the digital receiver Remote control Dio services Button mutes the sound. Press again to switch itButton sets a sleep timer These buttons have different functions per menu. TheyTo watch a pay service, you should take the following steps What is common interface?Safety precautions SetupPlease read the following safety precautions carefully UnpackingSetup TF 7700 Hsci has some connections on the back panel Rear panel connectionsConnecting the antenna Connecting up your digital receiverTo use the Hdmi connector Connecting to your televisionTo use the Scart connector To use the composite video connector Connecting to your video cassette recorderInserting batteries in the remote control Language settings Preference SettingsColour model Video and audio settingsTelevision aspect ratio Video cassette recorderHigh deﬁnition television Sound mode Local time settingPreference Settings Local time setting Time offset table City Parental control Adjusting the on-screen display Service Search Searching broadcasting services1 Conﬁguring LNB settings Searching broadcasting services 2 Conﬁguring DiSEqC 1.2 settings Searching broadcasting services 3 Conﬁguring Usals settings Searching services Service Search OK Editing the transponder list Resetting to installer settings Resetting to factory settingsService Search Daily Usage Volume controlWatching television LevelDown Button skips over 10 entries up or When the highlight bar is on an entry of which initialButton performs an alphabetic browse. For Button puts the highlight bar on the ﬁrstWatching television Favourite services Favourite services listButton After you have Button. ToViewing programme information Press Button continuously unReaches your desired level Viewing electronic programme guide Button, and adjust its transparency withSelecting audio tracks Selecting subtitle tracksHighlight bar on your choice with Button Press Button. To switch toMaking timer events Watching multifeed programmeYour desired satellite Making timer events Editing the services list Listing ServicesColumn and press the Vice to edit on Right column. To go over to the other col§ 6.3 for how to use the on-screen keyboard Editing the favourite list Each column Transferring receiver data How to use on-screen keyboardTransferring receiver data Firmware Update From your computer via RS-232 port From a USB storageFrom another digital receiver via RS-232 port From another digital receiver via RS-232 port Index LNB OUT Usals Page Correct disposal of this product