Listening to the Radio
2 3
1 FM MODE
1Press the TUNER button of the remote control unit (or repeatedly press the SOURCE button) to select “TUNER”.
<You can also use the BAND button or the remote control unit to select “TUNER”.
2Select AM or FM by pressing the BAND button.
3Press the TUNING MODE button to select the tuning mode.
Each time the TUNING MODE button is pressed, the tuning mode changes as follows:
Manual tune, Auto tune, Preset tune
Select “Manual tune” or “Auto tune”.
4Press the TUNING button to tune in a station.
In the Auto tune mode, the unit starts searching for a station. When a station is tuned in, the tuning process will stop automatically.
Repeat this step until the station you want to listen to is found.
<If you want to stop the tuning process, press the TUNING button.
In the Manual tune mode, the frequency changes by a fixed step. Repeatedly press (or hold down) the TUNING button until the station you want to listen to is found.
<The “TUNED” indicator lights when a station is correctly tuned in.
If the reception is poor
Rotate or relocate the antenna to find the best position for reception.
FM MODE Button
Pressing this button alternates between Stereo mode and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the “STEREO” indicator lights in the display.
<If the sound is distorted and the “STEREO” indicator flashes, the signal is not strong enough for good stereo reception. In this case, change to Mono mode.
Mono
To compensate for weak FM stereo reception, select this mode. Reception will now be forced to monaural, reducing unwanted noise.
33