Panasonic CQ-VA707N operating instructions General, Display

E

N

G

L

I

S

H

61

Troubleshooting (Continued)

■ General

Problem	Possible Cause	Probable Solution
	Volume is too low.	Raise volume.
No sound	Connections not made cor-	Check connections.
	rectly
	Condensation	Leave for some time before use.
	Volume is too low.	Raise navigation volume.
No sound from built-in
speakers	Navigation volume set to 0	Set navigation volume to higher than 0.
	Left-right, front-rear balance	Properly adjust BAL/FAD.
No sound from left, right,	is off.
front or rear speaker	Connections not made cor-	Check connections.
	rectly
Right and left sounds	Speaker wires are	Connect speaker wires correctly.
reversed in stereo	connected incorrectly.
Tilt angles and forward-		Be careful not to let the cord be caught, and
backward position of
	Obstacle is in the way.	use the display unit in a position free of contact
display unit cannot be
		with obstacles.
adjusted.
Display unit cannot be	Display unit is not in the	Return the display unit to the neutral position of
	neutral position of its lateral
retracted.		its lateral angle.
	angle.

■Display

		Problem		Possible Cause	Probable Solution
No image
Screen too dark				Dimmer, contrast, bright,	Adjust each of these screen adjustment items
				color, tint not adjusted prop-
					(dimmer, contrast, bright, color, tint).
Screen whitish				erly.
Tone not good, colors too
light
			Red, blue or	This is a characteristic of liquid crystal panels and is not a problem.
	■
			green spot

64

CQ-VA707N