Clarion CZ309E user manual Basic Operations

Car audio and car goods internet store Winauto

6. OPERATIONS

Note:

• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5.

Basic Operations

	CAUTION		Switching the display
			Press the [DISP] button to select the desired
Be sure to lower the volume before
			display.
switching off the unit power or the ignition
key. The unit remembers its last volume			Sound Adjustment
setting.
Turning on/off the power			You can adjust a sound effect or tone quality to
			your preference.
1. Press the [SRC] button to turn on the power.			To ch nge sound setting
2. Press and hold the [SRC] button for 1
			1.	Press the [SOUND] button to switch to the
second or longer to turn off the power for the
unit.				so nd dj stment selection display.
Note:				∗ The factory default sound setting is “Z-
• System check		winauto	4.	EHCR”.
				After completing settings, press the
The first time this unit is turned on after the wire			2	Then press the [x] or [v] button to
connections are completed, it must be checked				select the sound adjustment mode.
what equipment is connected. When the power				Each time you press the [x] or [v]
is turned on, the “S-CHECK” appears in the				button, the sound adjustment mode
display, then the unit returns to the clock display				changes as following order:
mode. The system check starts within the nit.				“Z-EHCR”↔ “BASS” ↔ “TREBLE” ↔
Then press the [SRC] button ag in, the nit t rn
to the radio mode.				“BALANCE” ↔ “FADER” ↔ “S-W LPF” ↔
				“S-W VOL” ↔ “HPF”
Selecting a mode				∗ In the case of display blinking “ENT”, you
1. Press the [SRC] button cha ge the				can press the [	] button to adjust the
				setting value.
operation mode.
				∗ The sound adjustment mode will be
2. Each time you press the [SRC] button, the
				displayed for 2 seconds before showing the
operation mode changes in the following
				sound setting.
order:			3.	Press the [w] or [z] button to adjust the
Radio ➜ (Satellite radio) ➜ CD/MP3/WMA/				selected audio mode.
AAC ➜ USB/MTP/iPod ➜ (CD changer) ➜
(DVD changer) ➜ (TV) ➜ AUX ➜ Radio...				[SOUND] button to return to the previous
∗ External equipment not connected with
				mode.
CeNET is not displayed.
∗ iPod/MTP can connect to this unit via USB			●Setting the Z-Enhancer Plus
SLOT.
			This unit is provided with 4 types of sound tone
Adjusting the volume			effects stored in memory.
1. Turning the [ROTARY] knob clockwise			Select the one you prefer.
			∗ The factory default setting is “OFF”.
increases the volume; turning it
counterclockwise decreases the volume.			2-1. Select “Z-EHCR”.

∗The volume level is from 0 (minimum) to 33 (maximum).

English

CZ3099