Clarion CZ309E user manual Satellite Radio Operations

Car audio and car goods internet store Winauto

Satellite Radio Operations

This function is available when a Satellite Radio Receiver is connected through the CeNET cable.

This unit can control the following satellite radio receivers:

•XM Satellite Interface Adapter (Mini-Tuner Included) : CNP2000UC

Clarion cable for CNP2000UC : CNPCLA1

•SIRIUS Satellite Radio Receiver : SIRCL3

•SIRIUS Satellite Translator Adapter : CLA-SC1 (which needs Sirius universal Tuner sold separately.)

Notes:

•When the function is differ depending to the connected receiver, they are distinguished by the following notations:

“XM”: for an XM Satellite Radio Receiver

“SIRIUS”: for a SIRIUS Satellite Radio Receiver

•XM and the XM logos are trademarks of XM Satellite Radio Inc.

Confirming your SIRIUS ID

1.Press and hold the [DISP] button for 1 second or longer to display the ADJUST item.

2.Press the [x] or [v] button to select “SID DISP”.

3.Press the [ ] button, the display will display the upper 6 digits.

4.Press the [w] or [z] button to switch

between the display for the upper 6 digits and lower 6 digits.

5.To return to the previous mode, press the [DISP] button.

Displ ying ch nnel labels

1.Press the [DISP] button to select the desired ch nnel label.

Channel ➜ Category ➜ Title (Artist) ➜ Radio text ➜ Channel...

English

	winauto
Selecting a Satellite Radio mode		Channel selection
1.	Press the [SRC] button.	1. Channels are selected with the [x] or
	The system changes to the specified		[v] button.
	Satellite Radio mode.		∗ For details, see the following operation
			descriptions.
Selecting a band		Note:
1.	Press the [BND] button to select b nd.	• The audio output is muted and other button
This changes the recept on ba d as follows:		operations are not accepted during channel
		selection.
	•XM: XM1 ➜ XM2 ➜ XM3 ➜ XM1 ...

•SIRIUS: SR1 ➜ SR2 ➜ SR3 ➜ SR1 ...	Tuning mode
● Information displayed during reception	There are two channel selection modes: quick
The following information is displayed when the
	tuning mode and step tuning mode.
satellite radio cannot be received normally.	● Quick tuning
• When the receiver is urned on the first time	1. Press and hold the [x] or [v] button for 1
or after a reset: “UPDATING”
	second or longer.
• When a channel is being tuned in (no signal is
	● Step tuning
yet received):	1. Press the [x] or [v] button.
XM: “LOADING”, SIRIUS: “LINKING”
• A channel without a broadcast has been
selected:
XM: “– – – CH”, SIRIUS: “INVALID CH”
• A channel not covered by your contract:
XM: “UPDATING”, SIRIUS: “CALL 888” ↔
“539-SIRI” (alternated)

CZ309 23