Clarion CZ309E user manual To stop pl y

English

Car audio and car goods internet store Winauto

USB/MTP Operations

Connecting a USB memory/MTP	To listen to tracks on a connected
device	USB memory/MTP device
1. Connect the USB memory/MTP device to the	1. Press the [SRC] button to switch the source.
USB slot.	When USB memory/MTP device is selected,
Playback will begin from the first file	playback (except DRM files) will begin from
recorded on the device.	the location at which playback was
	previously stopped.
	∗ When a USB memory/MTP device is
CAUTION
	connected the USB/MTP mode will be
Do not turn on vehicle ignition when the MTP	displayed.
	∗ When a USB memory/MTP device is
device is connected, since it may result in
	disconnected and then reconnected, playback
loss or damage to data on the MTP device.
	will begin from the beginning of the USB
Connect the MTP device to the USB slot after
	memory/MTP device.
vehicle ignition is turned on.	∗ When “MTP” mode is selected, AAC files on
	ua
	the MTP device cannot be played.

To stop pl y
1 Press the [SRC] button and switch the
winauto	f nction to source other than the USB
	memory.

		CAUTION
Confirm the proper		Do not remove the USB memory/MTP device
		when the USB/MTP mode is selected, since it
orientation of the		may result in loss or damage to data on the
connector before		USB memory/MTP device.
inserting.		Always backup and save important data on
∗ If the device is not recog zed, press the		your computer.
[SRC] button to sw tch the so rce	the

device.	2. Remove the USB memory/MTP device from
	the USB slot.
∗ Always insert the device fully into the
connector. Incomplete connections may
cause the device not be recognized.
∗ Depending on the number of tracks recorded,
some amount of time may be required until all
tracks are read into the unit.
∗ The order in which tracks are recorded may
differ depending on the device connected (the
actual playback order may not be the same as
that indicated on your computer’s display).

20 CZ309