Clarion CZ309E user manual Basic Operations

English

Car audio and car goods internet store Winauto

Basic Operations

3-1. Each time you press the [w] or [z] button,	3-4. Press the [	] button to return to the
the tone effect changes in the following	previous mode.
order:	●Adjusting the treble

“Z+FLAT” ↔ “CUSTOM ” ↔ “EXCITE” ↔ “IMPACT” ↔ “B-BOOST” ↔ “OFF”

Z+FLAT : user Z+FLAT

CUSTOM : user custom

EXCITE : bass and treble emphasized mid emphasized

IMPACT : bass and treble emphasized

B-BOOST : bass emphasized

OFF : no sound effect

When “Z+FLAT” is set:

This adjustment can be performed only when the Z-Enhancer Plus is set to “CUSTOM ”.

2-1. Select “TREBLE”.

3-1. Press the [w] or [z] button to select as following order.

“TREB<G>” ↔ “TREB<F>”

∗The factory default setting is “TREB<G>”. 3-2. Press the [ ] button.

3-3. Press the [w] or [z] button to adjust the gain, the F (center frequency) and the Q.

3-2. Press and hold the [			] button for 1second			TREB<G>:The factory default setting is “0”.
or longer, bass/treble characteristics						(Adjustment range: +7 to –7)
become flat and switch to the “CUSTOM ”						TREB<F>: The factory default setting is
mode.
						“10k”.
When “CUSTOM ” is set:						(Adjustment range:
3-1. Press the [x] or [v] button to select the
						10k/12.5k/15k/17.5k)
		winauto				REAR12 (front 12 to rear 12))
“BASS” or “TREBLE” mode to adjust.					3-4	Press the [	] button to return to the
When “EXCITE/IMPACT/B-BOOST” is se :						preuavio s mode.
3-2. Press the [		] button.			●Adjusting the balance
3-3. Press the [w] or [z] button to adj st he					2-1.	Select “BALANCE”.
setting in the range of –3 to +3.					3-1.	Press the [w] or [z] button to adjust the
∗ The factory default setting is “0”.						balance of the right and left speakers.
3-4. Press the [		] button to ret rn to the				∗ The factory default setting is “CENTER”
previous mode.						(center). (Adjustment range: RIGHT12 to
●Adjusting the bass						LEFT12 (right 12 to left 12))
					●Adjusting the fader
This adjustment can be performed o				ly when
					2-1.	Select “FADER”.
the Z-Enhancer Plus is set to “CUSTOM ”.
2-1. Select “BASS”.					3-1.	Press the [w] or [z] button to adjust the
3-1. Press the [	] or [z] button			select as		balance of the rear and front speakers.
following order.						∗ The factory default setting is “CENTER”
						(center). (Adjustment range: FRONT12 to
“BASS<G>” ↔ “BASS<F>” ↔ “BASS<Q>”
∗ The factory default setting is “BASS<G>”.					●Setting the subwoofer
3-2. Press the [		] button.
					You can set the low pass filter of subwoofer.
3-3. Press the [w] or [z] button to adjust the
					2-1.	Select “S-W LPF”.
gain, the F (center frequency) and the Q.
					3-1.	Each time press the [w] or [z] button to
BASS<G>
						select the setting, the setting changes in
: The factory default setting is “0”.
						the following order:
(Adjustment range: +7 to –7)						“THROUGH” ↔ “LPF 50” ↔ “LPF 80” ↔
BASS<F>						“LPF 120”
: The factory default setting is “60”.						∗ The factory default setting is “THROUGH”.

(Adjustment range: 60/80/100/200)

BASS<Q>

:The factory default setting is “1”. (Adjustment range: 1/1.25/1.5/2)

10 CZ309