Bosch Appliances PLE-2MA120-EU manual Technical data, Electrical

Page 31

Plena Mixer Amplifier Installation and User Instructions Technical data

en 31

6Technical data

6.1Electrical

6.1.1Mains power supply

Voltage

115 - 230 VAC, ±10%, 50/60 Hz

Inrush Current PLE-2MA120-EU

8/16 A (230/115 VAC)

Inrush Current PLE-2MA240-EU

9/19 A (230/115 VAC)

6.1.2Battery power supply

Voltage

24 VDC, ±15%

Current PLE-2MA120-EU

6 A

Current PLE-2MA240-EU

12 A

Charge current 0.5 ADC

Charge float voltage 27.4 VDC

6.1.3Power consumption

PLE-2MA120-EU (mains)

400 VA

PLE-2MA240-EU (mains)

800 VA

6.1.4Performance

Frequency response

50 Hz to 20 kHz (+1/-3 dB @ -10 dB ref. rated output)

Distortion

<1% @ rated output power, 1 kHz Low Control

Max -12/+12 dB (frequency is level dependent) Hi Control

Max -12/+12 dB (frequency is level dependent)

6.1.5RJ-45 input 2 x

Call station input

For PLE-2CS(MM)

Wall panel input

For PLE-WP3S2Z

6.1.6Mic/line input 6 x

Input 1 (Push-to-talk contact with ducking functionality)

5-pin Euro style, balanced, phantom

3-pin XLR, balanced, phantom

Input 2-6 (VOX with ducking functionality on input 2)

3-pin XLR, balanced, phantom Sensitivity

1 mV (mic); 200 mV (line) Impedance

>1 kohm (mic); >5 kohm (line) S/N (flat at max volume)

63 dB

S/N (flat at min volume/muted) >5 dB

Dynamic range 100 dB

S/N (flat at max volume) >63 dB (mic); >70 dB (line)

S/N (flat at min volume/muted) >75 dB

CMRR

>40 dB (50 Hz to 20 kHz) Headroom

>25 dB Speech filter

-3 dB @ 315 Hz, high-pass, 6 dB/oct Phantom power supply

16 V via 1.2 kohm (mic) Speech filter

-3 dB @ 315 Hz, high-pass, 6 dB/oct

VOX (input 1 & 2)

attack time 150 ms; release time 2 s

Bosch Security Systems 2007-11 PLE-1MA030-EU, PLE-1MA060-EU, PLE-1MA120-EU en

Image 31
Contents Plena Mixer Amplifier Important safeguards Table of contents Operation Related documentation IntroductionPurpose Digital document Intended audienceConversion of units of mass Conversion tablesPlena Mixer Amplifier Contents of boxDescription Plena product rangeSchematic overview of the Plena Mixer Amplifier Front panel Controls, connectors and indicatorsPlena PLE-WP2Z3S wall panel Rear panel Rear panel Intentionally left blank Unpack unit InstallationInstall unit in rack optional Check settings/connectionsIntentionally left blank Connecting inputs Connections and settingsDC supply battery Priority microphone input XLR connector onlyAdditional microphones inputs 3 through Secondary microphone inputEmergency inputs Connecting 100 Volt input signalConnecting emergency telephone lines Music source inputs Connecting music source inputsMusic only Connecting outputsZone 1 Call onlyConstant voltage loudspeakers Connecting speakersRear panel settings Unit settingsRotary controls Pin settings and labelling Intentionally left blank Operation Switch on and offSwitch off Switch onMusic controls Microphone/line controlsTone control Output controls Master volume controlZone selection Intentionally left blank Electrical Technical dataEnvironmental MechanicalPage For more information visit