Atlas Sound DSP8807 specifications 70V Speaker Termination, Audio Line Level Termination 1V/600Ω

DSP8807	Digital Processor
	and Amplifier
70V SPEAKER TERMINATION

Owner’s Manual

Dockable 2-pin/socket connectors (commonly referred to as ‘Phoenix’ type) are used which are keyed or polarized to fit one way – do not force fit these connectors and follow these basic instructions;

•Do NOT force fit the connectors – they are polarized to fit in one direction

•Follow the +/- wiring polarity to all speakers

•Use only 70V speakers

•Ensure that total speaker wattage taps per channel does NOT EXCEED 80% of the rated output of 50W RMS per zone.

SPEAKER OUTPUTS (70V)

ZONE 1		ZONE 2		ZONE 3		ZONE 4
+	–	+	–	+	–	+	–

50W RMS / ZONE

++

––

70V SPEAKERS

AUDIO LINE LEVEL TERMINATION (1V/600Ω)

Typical use of the Audio Line Output is to increase the power (Watts) via an auxiliary amplifier capable of powering speakers above the 50W RMS level provided by DSP8807. Ensure the wiring matches the (+ / - / G) for each zone output to each amplifier audio input.

LINE OUTPUTS (1V / 600 OHM)

++

––

AUXILIARY AMPLIFIER

(ADDED POWER)

	1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
	Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com	– 10 –
	Specifications are subject to change without notice.