Atlas Sound DSP8807 System Outputs unless noted located on rear panel, System Mechanical Data

DSP8807	Digital Processor
	and Amplifier

SYSTEM OUTPUTS (unless noted located on rear panel)

Owner’s Manual

Speakers (x8)			2-pin Dockable Keyed Connector (70v at 50WRMS)
Audio Line Level (x8)			3-pin Dockable Keyed Connector (1v Nominal)
		Microphone Frequency Level	80Hz – 18kHz
		Music	80Hz – 20kHz
		Line Out	80Hz – 18kHz
		Telco	250Hz – 4kHz
Network System Link			RJ45 Modular Jack (EIA 568B)
Ancillary Line Out (x2)			2-pin Dockable Keyed Connector, Contact Closure

SYSTEM AMPLIFIERS (x8)

Frequency Response	80Hz – 20kHz, ± .25dB
Total Distortion	.001% typical at +4dB, 1kHz, 0dB Gain
Transformer Output	70,7V and IV Line Level
Efficiency	85% or Better
Gain Control	Adjustable to 34dB
Power Supply	UL / CUL /CE Recognized
Input Impedance	50kΩ
Output Impedance	8Ω
Carrier Frequency	400kHz
Peak Current	1.2A
MTBF (Mean Time Between Failure)	100,000 Hours
EMC / EMI Radiation	FCC Part 15 Class B, EN6100, CISPR 22

SYSTEM MECHANICAL DATA

Dimensions (L x W x H)	14.0" (358mm) x 19.0" (482.6mm) x 3.5" (88.9mm)
Material (Outer Housing)	CRS (Cold Roll Steel) 18AWG (.047" Nominal)
Finish	Flat Black Powder Coat with Zinc Undercoat Corrosion Resistant
Printed Circuit Boards	UL recognized UL94VO
Electronic Components	RoHS
Operating Temperature	0˚ to +50˚C
Storage Temperature	-40˚ to + 85˚C
Humidity	95% Non-Condensing (Max.)

	1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
	Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com	– 32 –
	Specifications are subject to change without notice.