Creating an FMA Configuration File (Cont.)
(Continued from previous page)
5.To add the current FTG Installer Menu settings to the FMA Configuration List, click 
under FTG Installer Menu Settings. This will copy the currently selected model’s settings to the FMA Configuration List.
Note: If you make any change(s) in the FTG Installer Menu Configuration Utility to the current data to be included in the FMA Configuration List, you will need to recopy the FTG Installer Menu settings to the FMA Configuration List.
6.Click the Save button in the FMA File command section of the FMA Configuration Utility screen (above the FMA Configuration List) to save the FMA Configuration List contents to an FMA Configuration (.fma) file on the PC’s hard drive for later use.
Note: To remove an individual item from the FMA Configuration List before saving the new file, click on/highlight the item to be removed, and then click the Remove Item button directly above the FMA Configuration List window. To clear the current FMA Configuration List contents, click the New button in the FMA File command section of the FMA Configuration Utility.
Filename of opened FTG Configuration (.rml) file.
Copy FTG Channel Map to and from FMA Configuration List.
Copy FTG Installer Menu
settings to and from FMA
Configuration List.
Load default FTG Installer Menu for selected model(s).
FMA Configuration List Data to be saved in FMA Configuration (.fma) file or ready for transfer to FMA.
New/Open/Save
FMA File options.
Set the FMA clock to the PC’s clock.
Set the FMA broadcast rate.
Write/Read
FMA Configuration
Transfer options.
Confirm IP address for FMA IP Communication.
Note: The data referenced in the FMA Configuration List is a only
9 |