LG Electronics warranty FMA-LG101 Configuration using the FMA-LG101 Software Web

FMA-LG101 Configuration (Cont.)

(Continued from previous page)

a.Click the down arrow at the right of the FMA Broadcast field, and select the number of seconds (60 – 999) for the broadcast rate (“0” disables data broadcasting).

b.Click the Set Rate button to set the selected rate of broadcast in the FMA.

c.Once the system processes the request, a pop-up report message indicates success. Click OK to close the pop-up window.

3.Click File and then Exit from the FTG Device Configuration Application menu bar to exit the FMA Configuration Utility.

4.Connect the FMA-LG101 to the RF distribution system as described on page 16.

FMA-LG101 Configuration using the FMA-LG101 Software Web Page

1.Launch a web browser, and type http://ipaddress in the browser’s address bar, where ipaddress is either the network IP address assigned by a DHCP server to the FMA-LG101 or the FMA-LG101’s default IP address (see “FMA-LG101 Configuration Prerequisites” on page 13). Then, press Enter.

FMA-LG101 Software Web

Page Main Screen

Fields at the bottom left corner of the screen identify the FMA- LG101 firmware version, IP address, and MAC address.

2.Once you have accessed the FMA-LG101 web page, configure the FMA clock and broadcast rate and update the FMA-LG101 configuration as described below.

(Continued on next page)

206-4124 15